Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. JMACD-12XL specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.350in. and 0.370in. ⁓3/8"
The distance measured in a straight line from the bottom to the top of an item.
0.280in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.350in. and 0.370in.
The number of individual /not electrically connected/ windings.
1
The number of coils included on the item.
1
The measured opposition to the flow of direct current offered by the item winding.
390.0 ohms single winding
Indicates the type of duty provided.
continuous
Indicates the type and number of facilities by which the item is mounted.
9 terminal single mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
2 pole, double throw, one position momentary
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
feat
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
12.0 volts dc 25 deg celsius single winding
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
500.0 milliamperes ac resistive load and 1.0 amperes dc resistive load
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
0.1 amperes dc lamp load
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
0.2 amperes dc inductive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
115.0 ac and 28.0 dc
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
failure rate 3.0 percent per 10000 cycles
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-R-39016 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
9 pin all functions
The document designator of the specification or standard which established the item of supply.
81349-MIL-R-39016/15 government specification
Answers.
0.350 inches minimum and 0.370 inches maximum
Schedule B number: 8536490050
Relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-01-299-0391 RELAY,ELECTROMAGNETIC
failure rate 3.0 percent per 10000 cycles 0.350" overall width 0.350" overall length
- NIIN
- 012990391
- NIIN Date
- 04/24/89
- Schedule B
- 8536490050
- Name Code
- 32512
- FIIG
- A03300
- QUP
- Historical Price
- $82.93 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | M39016/15-079L | Cage 81349 |
| 2. | MIL-PRF-39016/15 | Cage 81349 |
| 3. | J412D-12L | Cage 63745 |
| 4. | 914S70201-10L | Cage 99699 |
| 5. | J412D-12L | Cage U0611 |
| 6. | J412D12L | Cage 11532 |
| 7. | MIL-R-39016/15 | Cage 81349 |
Major End Users Countries and entities
- - Austria
- - Singapore
- - Germany
- - Republic of Korea
- - United Kingdom
- - Italy
Availability for JMACD-12XL A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
JMACD-12XL / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
