J-D4A-019

JD4A019 Electromagnetic Relay

Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.

Part Number:
Quantity Requested:
Your Email:
Full Name:
Contact Phone:
Company:

Quality Commitment

Serving our customers with quality and safety first.

  •   AS9120 Certified
  •   Audited supply chain
  •   ITAR Registered
  •   DDTC Registered
  •   HAZMAT Certified
  •   Customer service objectives
  •   Every product 100% inspected
AS9120 Certified by SAI Global

Datasheet. J-D4A-019 specification

Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.

1.718in. ⁓1-23/32"

Center To Center Distance Between Mounting Facilities Parallel To Length
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.

1.396in. single mounting facility and 1.446in. single mounting facility

Overall Height
The distance measured in a straight line from the bottom to the top of an item.

1.310in.

Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.

0.525in.

Mounting Slot Width
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.

0.150in. single mounting facility

Environmental Protection
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.

hermetic

Winding Quantity
The number of individual /not electrically connected/ windings.

1

Coil Quantity
The number of coils included on the item.

1

Winding Dc Resistance Rating
The measured opposition to the flow of direct current offered by the item winding.

320.0 ohms single winding

Duty Type
Indicates the type of duty provided.

continuous

Mounting Facility Type And Quantity
Indicates the type and number of facilities by which the item is mounted.

2 slotted hole single mounting facility

Features Provided
Those features,not otherwise specified,which may be required for proper functioning of the item.

polarized

Mounting Facility Pattern
The general configuration and relative position of the facilities provided for mounting the item.

IN-Line single mounting facility

Nonpile-up Main Contact Arrangement
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.

2 pole, double throw, one position momentary

Operating Voltage Rating And Type At Specified Temp
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.

28.0 volts dc 25 deg celsius single winding

Main Contact Load Current Rating At Maximum Rated Voltage
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.

6.0 amperes ac motor load and 4.0 amperes dc motor load

Main Contact Load Current Rating At Maximum Rated Voltage
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.

8.0 amperes ac inductive load and 8.0 amperes dc inductive load

Main Contact Load Current Rating At Maximum Rated Voltage
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.

15.0 amperes ac resistive load and 15.0 amperes dc resistive load

Main Contact Load Current Rating At Maximum Rated Voltage
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.

2.0 amperes ac lamp load and 2.0 amperes dc lamp load

Main Contact Maximum Voltage Rating In Volts
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.

200.0 ac and 28.0 dc

Special Features
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.

temp range minus 70.0 deg to plus 125.0 deg c; pickup voltage 18.0 vdc max; hold voltage 7.0 vdc; DROP-Out voltage 1.5 vdc min; coil current 0.11 amp max; terminal strength 5.0 lbs ; pins are underplated (except polarizing pin is tinned) prior to gold plating (per MIL-G-45204, type ii, class i) with nickel 50.000 to 150.000 microinches thick; pins are 0.062 inch dia and 0.270 inch length with exception of polarizing pin which is 0.300 inch length; 0.050 inch thickness silicone rubber gasket per ams 3332, with shore hardness of 20, is located against bottom of case and at base of pins

Precious Material And Location
An indication of the precious material and its location in the item.

terminals gold

Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.

8 pin all functions

Answers.

What is the overall width?

0.525 inches maximum

What is the NSN for J-D4A-019?

5945-01-463-9427

How is this classified for shipping?

Schedule B number: 8536490075
Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v

What's the federal classification of J-D4A-019?

FSC 5945 ⁓ Relays and solenoids

Excluding contractors.

NSN 5945-01-463-9427 RELAY,ELECTROMAGNETIC

temp range minus 70.0 deg to plus 125.0 deg c; pickup voltage 18.0 vdc max; hold voltage 7.0 vdc; drop-out voltage 1.5 vdc min; coil current 0.11 amp max; terminal strength 5.0 lbs ; pins are underplated (except polarizing pin is tinned) prior to gold plating (per mil-g-45204, type ii, class i) with nickel 50.000 to 150.000 microinches thick; pins are 0.062 inch dia 0.525" overall width 1.718" overall length

NIIN
014639427
NIIN Date
04/09/99
Schedule B
8536490075 
Name Code
32512
FIIG
A03300
DEMIL / ITAR
Uncontrolled item (Code A)
Hazmat
No hazard information available from HMIRS.
MSDS
N/A
Precious Metals
Contains gold
Enviromental
N/A
Electrostatic ESD & EMI
No ESD or EMI sensitivity

Other Part Numbers Parts with same form, fit, and function by other manufacturers

Major End Users Countries and entities

  • - Netherlands 

Availability for J-D4A-019 A member of our team will provide you with a price and availability quote

Request a Quote »

Similar by Design Other relays with similar characteristics

Nothing similar to this part number was found in our inventory

J-D4A-019 / Relay,electromagneticWhat is the formal definition of this item?

A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.