Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7012AALX specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b second mounting facility
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand second mounting facility
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
6.230in. ⁓6-15/64"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
0.500in. second mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
1.750in. second mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
2.812in. first mounting facility
The distance measured in a straight line from the bottom to the top of an item.
3.810in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
3.810in.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
plastic
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
dustproof
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.156in. first mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.
2.812in. first mounting facility
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
moderately rugged
The cycles per second /hertz/ of the alternating current.
60.0
The number of individual /not electrically connected/ windings.
1
The purpose for which the item is designed.
general
The number of coils included on the item.
1
Indicates the type of duty provided.
continuous
The means of quenching an arc.
air
Indicates the type and number of facilities by which the item is mounted.
4 threaded hole second mounting facility
Indicates the type and number of facilities by which the item is mounted.
4 unthreaded hole first mounting facility
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.
general purpose warehouse
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
90.435 cubicin.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 second mounting facility
A designation that is used for the purpose of general identification of the thread.
0.164in. second mounting facility ⁓11/64"
The general configuration and relative position of the facilities provided for mounting the item.
rectangular first mounting facility
The general configuration and relative position of the facilities provided for mounting the item.
rectangular second mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
2 pole, double throw, one position momentary
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.10 seconds adjustable operate time and 1.00 seconds adjustable operate time
The designation that identifies the schematic diagram of the electrical configuration of the auxiliary nonpile-up contacts including the number of poles or forms.
1 pole, double throw, one position momentary
The highest voltage at which the auxiliary contacts are rated for normal operation,expressed in volts.
125.0 ac
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
120.0 volts ac 25 deg celsius single winding
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
10.0 amperes ac resistive load and 15.0 amperes dc resistive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
240.0 ac and 30.0 dc
The amount of current the auxiliary contacts are rated to make or break at maximum rated voltage,with a specified load.
10.0 amperes ac resistive load
The amount of electrical energy which the energizing element is capable of dissipating at its rated voltage and/or current during normal operation.
8.0 watts
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc second mounting facility
Indicates the type and number of terminals for providing electrical connection.
11 screw all functions
Answers.
Unc second mounting facility
32 second mounting facility
3.810 inches maximum
Right-hand second mounting facility
2b second mounting facility
Schedule B number: 8536490075
nmfc 061300
Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-01-017-0358 RELAY,ELECTROMAGNETIC
unc second mounting facility thread series 32 second mounting facility thread quantity per inch 3.810" overall width 6.230" overall length right-hand second mounting facility 2b second mounting facility thread class
- NIIN
- 010170358
- NIIN Date
- 02/28/76
- Schedule B
- 8536490075
- Name Code
- 32512
- FIIG
- A03300
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - France
Availability for 7012AALX A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
7012AALX / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
