Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6HX2A2A2500S12 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand single mounting facility
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.328in. single mounting facility ⁓21/64"
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.810in. ⁓3-13/16"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
0.813in. single mounting facility
The distance measured in a straight line from the bottom to the top of an item.
2.500in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.750in.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
brass
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
moderately rugged
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.
silver
The number of individual /not electrically connected/ windings.
2
The purpose for which the item is designed.
general
The number of coils included on the item.
2
The measured opposition to the flow of direct current offered by the item winding.
2.5 kilohms all windings
Indicates the type of duty provided.
continuous
The means of quenching an arc.
inert gas
Indicates the type and number of facilities by which the item is mounted.
3 threaded stud single mounting facility
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.
general purpose warehouse
Those features,not otherwise specified,which may be required for proper functioning of the item.
polarized
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
16.669 cubicin.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.164in. single mounting facility ⁓11/64"
The general configuration and relative position of the facilities provided for mounting the item.
triangle single mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
4 pole, single throw, normally open, momentary action
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the altitude of an isosceles triangle.
2.594in. single mounting facility
The lowest net amount of the specified energizing electrical characteristic necessary for the normal functioning of the relay. the net value being the difference between multiple or opposed input elements during normal operation.
4.2 milliamperes
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
5.0 amperes ac resistive load and 5.0 amperes dc resistive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
120.0 ac and 28.0 dc
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
a. when the current difference reaches 0.0042 amp in two coils the coil with the higher current will close two sets of spst, normally open contacts, when the same current difference appears in other coil the other two sets of spst normally open contacts will close, and the first set of contacts will open
An indication of the precious material and its location in the item.
contacts silver
Identification of the precious material contained in the item.
silver
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc single mounting facility
Indicates the type and number of terminals for providing electrical connection.
12 tab, solder lug all functions
Answers.
1EA
Unc single mounting facility
32 single mounting facility
1.750 inches
0.328 inches single mounting facility
Right-hand single mounting facility
2a single mounting facility
Schedule B number: 8536490050
nmfc 061300
Relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-258-7800 RELAY,ELECTROMAGNETIC
unc single mounting facility thread series a. when the current difference reaches 0.0042 amp in two coils the coil with the higher current will close two sets of spst, normally open contacts, when the same current difference appears in other coil the other two sets of spst normally open contacts will close, and the first set of contacts will open 32 single mounting facility thread quantity per inch 1.750" overall width 3.810" overall length 0.328" single mounting facility thread length right-hand single mounting facility 2a single mounting facility thread class
- NIIN
- 002587800
- NIIN Date
- 01/01/63
- Schedule B
- 8536490050
- Name Code
- 32512
- FIIG
- A03300
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $167.40 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains silver
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 6HX2A2A91090 | Cage 78277 |
| 2. | 6HX2A2A2500GDSIL | Cage 78277 |
| 3. | 91090 | Cage 78277 |
Major End Users Countries and entities
- - Spain
Availability for 6HX2A2A2500S12 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
6HX2A2A2500S12 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
