Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 5001A3001-11 specification
Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.875in. ⁓3-7/8"
Center To Center Distance Between Mounting Facilities Parallel To Length
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
2.625in. single mounting facility
Overall Height
The distance measured in a straight line from the bottom to the top of an item.
The distance measured in a straight line from the bottom to the top of an item.
3.125in.
Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
3.375in.
Case Material
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
plastic
Unthreaded Mounting Hole Diameter
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.120in. single mounting facility
Fragility Factor
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
moderately rugged
End Item Identification
The national stock number or the identification information of the end equipment for which the item is a part.
The national stock number or the identification information of the end equipment for which the item is a part.
ac controller
Frequency In Hertz
The cycles per second /hertz/ of the alternating current.
The cycles per second /hertz/ of the alternating current.
60.0
Winding Quantity
The number of individual /not electrically connected/ windings.
The number of individual /not electrically connected/ windings.
1
Purpose For Which Designed
The purpose for which the item is designed.
The purpose for which the item is designed.
general
Coil Quantity
The number of coils included on the item.
The number of coils included on the item.
1
Duty Type
Indicates the type of duty provided.
Indicates the type of duty provided.
continuous
Arc Quenching Method
The means of quenching an arc.
The means of quenching an arc.
air
Mounting Facility Type And Quantity
Indicates the type and number of facilities by which the item is mounted.
Indicates the type and number of facilities by which the item is mounted.
2 unthreaded hole single mounting facility
Storage Type
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.
general purpose warehouse
Cubic Measure
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
40.869 cubicin.
Mounting Facility Pattern
The general configuration and relative position of the facilities provided for mounting the item.
The general configuration and relative position of the facilities provided for mounting the item.
IN-Line single mounting facility
Nonpile-up Main Contact Arrangement
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
3 pole, single throw, normally open, momentary action
Operating Voltage Rating And Type At Specified Temp
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
120.0 volts ac 25 deg celsius single winding
Main Contact Load Current Rating At Maximum Rated Voltage
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
30.0 amperes ac resistive load
Main Contact Maximum Voltage Rating In Volts
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
440.0 ac
Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.
Indicates the type and number of terminals for providing electrical connection.
8 screw all functions
Answers.
What quantity is this sold in?
1EA
What is the overall width?
3.375 inches
How is this classified for shipping?
Schedule B number: 8536490075
nmfc 061300
Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v
What's the federal classification of 5001A3001-11?
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-01-201-7430 RELAY,ELECTROMAGNETIC
Used on ac controller. 3.375" overall width 3.875" overall length
- NIIN
- 012017430
- NIIN Date
- 02/22/85
- Schedule B
- 8536490075
- Name Code
- 32512
- FIIG
- A03300
- Item Weight
- 1.200lbs
- Item Dimensions
- 39 X 34 X 31
- QUP
- 1
- Historical Price
- $739.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
Major End Users Countries and entities
- - Department of The Air Force
- - Department of The Navy
Availability for 5001A3001-11 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
5001A3001-11 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
