Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2920134-3 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.719in. ⁓1-23/32"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
1.396in. single mounting facility and 1.416in. single mounting facility
The distance measured in a straight line from the bottom to the top of an item.
2.700in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.875in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic and humidity resistant and salt spray resistant and shock resistant and vibration resistant and water resistant
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.128in. single mounting facility
The number of individual /not electrically connected/ windings.
1
The number of coils included on the item.
1
Indicates the type of duty provided.
continuous
Indicates the type and number of facilities by which the item is mounted.
2 unthreaded hole single mounting facility
Those features,not otherwise specified,which may be required for proper functioning of the item.
coil voltage suppression
The general configuration and relative position of the facilities provided for mounting the item.
IN-Line single mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
1 pole, double throw, one position momentary
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
50.0 milliamperes dc single winding
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
300.00 seconds fixed operate time
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
50.0 volts dc 25 deg celsius single winding
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
250.0 milliamperes dc inductive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
50.0 dc
An indication of the precious material and its location in the item.
terminal surfaces gold
Identification of the precious material contained in the item.
gold
Indicates the type and number of terminals for providing electrical connection.
5 pin all functions
Answers.
1EA
0.875 inches
Schedule B number: 8536410020
nmfc 061300
Relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-311-6480 RELAY,ELECTROMAGNETIC
0.875" overall width 1.719" overall length
- NIIN
- 003116480
- NIIN Date
- 10/24/73
- Schedule B
- 8536410020
- Name Code
- 32512
- FIIG
- A03300
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $713.28 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 93141-3 | Cage 48313 |
| 2. | H31305 | Cage 82227 |
| 3. | 93141-3 | Cage 07031 |
Major End Users Countries and entities
- - Department of The Navy
- - Italy
Availability for 2920134-3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
2920134-3 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
