Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 2312410PC1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.075in. ⁓1-5/64"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
0.488in. single mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
0.220in. single mounting facility
The distance measured in a straight line from the bottom to the top of an item.
0.800in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.821in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic
The number of individual /not electrically connected/ windings.
1
The number of coils included on the item.
1
The measured opposition to the flow of direct current offered by the item winding.
2.5 kilohms single winding
Indicates the type of duty provided.
continuous
Indicates the type and number of facilities by which the item is mounted.
2 threaded stud single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.112in. single mounting facility ⁓1/8"
The general configuration and relative position of the facilities provided for mounting the item.
diagonal single mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
2 pole, double throw, one position momentary
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
4.0 milliamperes dc single winding
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.004 seconds fixed release time
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.01 seconds fixed operate time
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
1.0 amperes dc resistive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
30.0 dc
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc single mounting facility
Indicates the type and number of terminals for providing electrical connection.
8 pin all functions
Answers.
1EA
Unc single mounting facility
0.821 inches maximum
2a single mounting facility
Schedule B number: 8536410020
nmfc 061300
Relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-762-0132 RELAY,ELECTROMAGNETIC
unc single mounting facility thread series 0.821" overall width 1.075" overall length 2a single mounting facility thread class
- NIIN
- 007620132
- NIIN Date
- 01/01/63
- Schedule B
- 8536410020
- Name Code
- 32512
- FIIG
- A03300
- QUP
- 1
- Historical Price
- $188.68 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 2R-M1188 | Cage 99699 |
| 2. | 2R04A450F | Cage 05587 |
Major End Users Countries and entities
- - Department of The Navy
- - Spain
- - France
- - Italy
- - Turkey
Availability for 2312410PC1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
2312410PC1 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
