Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1734-1725 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.172in. ⁓1-11/64"
The distance measured in a straight line from the bottom to the top of an item.
1.398in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.734in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
dustproof
The element,compound,or mixture of which the contact/s/ is fabricated,excluding any surface treatment.
silver
Consists of plating,dip,and/or coating that cannot be wiped off. plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects the contact surface.
gold
The number of individual /not electrically connected/ windings.
1
The number of coils included on the item.
1
The measured opposition to the flow of direct current offered by the item winding.
2.5 kilohms single winding
Indicates the type of duty provided.
continuous
Indicates the type and number of facilities by which the item is mounted.
1 threaded stud single mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
48 single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.099in. single mounting facility ⁓7/64"
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
4 pole, double throw, one position momentary
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
8.4 milliamperes dc single winding
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.008 seconds fixed release time
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.015 seconds fixed operate time
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
2.0 amperes ac resistive load and 2.0 amperes dc resistive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
120.0 ac and 28.0 dc
An indication of the precious material and its location in the item.
contact silver and contact surface gold
Identification of the precious material contained in the item.
gold and silver
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc single mounting facility
Indicates the type and number of terminals for providing electrical connection.
14 tab, solder lug all functions
Answers.
Unc single mounting facility
48 single mounting facility
0.734 inches maximum
2a single mounting facility
Schedule B number: 8536490050
Relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-146-5021 RELAY,ELECTROMAGNETIC
unc single mounting facility thread series 48 single mounting facility thread quantity per inch 0.734" overall width 1.172" overall length 2a single mounting facility thread class
- NIIN
- 001465021
- NIIN Date
- 09/10/71
- Schedule B
- 8536490050
- Name Code
- 32512
- FIIG
- A03300
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains combination of precious metals (silver, gold, platinum)
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 4-1725 | Cage 63002 |
| 2. | 50156-1 | Cage 63002 |
| 3. | 62R4S2500 | Cage 78277 |
| 4. | 70R4S2500 | Cage 78277 |
Major End Users Countries and entities
- - Canada
Availability for 1734-1725 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
1734-1725 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
