Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 167943-1 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b first mounting facility
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b second mounting facility
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand first mounting facility
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand second mounting facility
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.375in. ⁓1-3/8"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
0.250in. first mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
0.312in. second mounting facility
The distance measured in a straight line from the bottom to the top of an item.
1.312in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.312in.
The number of individual /not electrically connected/ windings.
1
The number of coils included on the item.
1
The measured opposition to the flow of direct current offered by the item winding.
250.0 ohms single winding
Indicates the type of duty provided.
continuous
Indicates the type and number of facilities by which the item is mounted.
2 threaded hole first mounting facility
Indicates the type and number of facilities by which the item is mounted.
2 threaded hole second mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40 first mounting facility
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40 second mounting facility
A designation that is used for the purpose of general identification of the thread.
0.112in. first mounting facility ⁓1/8"
A designation that is used for the purpose of general identification of the thread.
0.112in. second mounting facility ⁓1/8"
The general configuration and relative position of the facilities provided for mounting the item.
IN-Line first mounting facility
The general configuration and relative position of the facilities provided for mounting the item.
IN-Line second mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
1 pole, double throw, one position momentary
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.008 seconds fixed release time
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.012 seconds fixed operate time
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
27.5 volts dc 25 deg celsius single winding
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
flange mounted
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc first mounting facility
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc second mounting facility
Indicates the type and number of terminals for providing electrical connection.
5 tab, solder lug all functions
Answers.
Unc second mounting facility
Unc first mounting facility
40 second mounting facility
40 first mounting facility
1.312 inches
Right-hand second mounting facility
Right-hand first mounting facility
2b second mounting facility
2b first mounting facility
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-706-8508 RELAY,ELECTROMAGNETIC
unc second mounting facility thread series flange mounted 40 second mounting facility thread quantity per inch 1.312" overall width 1.375" overall length right-hand second mounting facility 2b second mounting facility thread class
- NIIN
- 007068508
- NIIN Date
- 01/01/63
- Schedule B
- Name Code
- 32512
- FIIG
- A03300
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Canada
Availability for 167943-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
167943-1 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
