Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 13036548-1 specification
Overall Length
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
12.500in. ⁓12-1/2"
Center To Center Distance Between Mounting Facilities Parallel To Length
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
3.000in. second mounting facility
Center To Center Distance Between Mounting Facilities Parallel To Length
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
3.000in. first mounting facility
Center To Center Distance Between Mounting Facilities Parallel To Width
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
1.620in. second mounting facility
Center To Center Distance Between Mounting Facilities Parallel To Width
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
2.380in. first mounting facility
Overall Height
The distance measured in a straight line from the bottom to the top of an item.
The distance measured in a straight line from the bottom to the top of an item.
2.810in.
Overall Width
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
3.000in.
Environmental Protection
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic and water resistant
Unthreaded Mounting Hole Diameter
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.218in. second mounting facility
Unthreaded Mounting Hole Diameter
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.290in. first mounting facility
Frequency In Hertz
The cycles per second /hertz/ of the alternating current.
The cycles per second /hertz/ of the alternating current.
50.0 and 60.0
Winding Quantity
The number of individual /not electrically connected/ windings.
The number of individual /not electrically connected/ windings.
1
Coil Quantity
The number of coils included on the item.
The number of coils included on the item.
1
Duty Type
Indicates the type of duty provided.
Indicates the type of duty provided.
continuous
Mounting Facility Type And Quantity
Indicates the type and number of facilities by which the item is mounted.
Indicates the type and number of facilities by which the item is mounted.
4 unthreaded hole first mounting facility
Mounting Facility Type And Quantity
Indicates the type and number of facilities by which the item is mounted.
Indicates the type and number of facilities by which the item is mounted.
8 unthreaded hole second mounting facility
Mounting Facility Pattern
The general configuration and relative position of the facilities provided for mounting the item.
The general configuration and relative position of the facilities provided for mounting the item.
rectangular first mounting facility
Mounting Facility Pattern
The general configuration and relative position of the facilities provided for mounting the item.
The general configuration and relative position of the facilities provided for mounting the item.
rectangular second mounting facility
Nonpile-up Main Contact Arrangement
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
1 pole, single throw, normally open, momentary action
Nominal Operating Current Rating And Type
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
2.5 amperes ac single winding
Time Delay
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.025 seconds fixed operate time
Time Delay
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.06 seconds fixed release time
Operating Voltage Rating And Type At Specified Temp
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
115.0 millivolts ac 25 deg celsius single winding
Energizing Element Power Rating
The amount of electrical energy which the energizing element is capable of dissipating at its rated voltage and/or current during normal operation.
The amount of electrical energy which the energizing element is capable of dissipating at its rated voltage and/or current during normal operation.
17.0 watts
Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.
Indicates the type and number of terminals for providing electrical connection.
2 connector, plug energizing element
Terminal Type And Quantity
Indicates the type and number of terminals for providing electrical connection.
Indicates the type and number of terminals for providing electrical connection.
2 screw contacts
Answers.
What is the overall width?
3.000 inches
What's the federal classification of 13036548-1?
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-01-188-4153 RELAY,ELECTROMAGNETIC
3.000" overall width 12.500" overall length
- NIIN
- 011884153
- NIIN Date
- 09/04/84
- Schedule B
- Name Code
- 32512
- FIIG
- A03300
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Germany
- - Italy
Availability for 13036548-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- 85.0
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Supplies and equipment for aircraft and aerial targets, including aircraft and maintenance parts, aircraft accessories, aircraft
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061700 ELEC APPLIANCES/INSTRUMENTS NOI
- UFC (universal freight code)
- 34580
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
13036548-1 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
