Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 128C849H01 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.343in. ⁓4-11/32"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
3.677in. single mounting facility and 3.697in. single mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
3.490in. single mounting facility and 3.510in. single mounting facility
The distance measured in a straight line from the bottom to the top of an item.
3.956in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
4.156in.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.218in. single mounting facility
The cycles per second /hertz/ of the alternating current.
400.0
The number of individual /not electrically connected/ windings.
1
The number of coils included on the item.
1
Indicates the type of duty provided.
continuous
Indicates the type and number of facilities by which the item is mounted.
4 unthreaded hole single mounting facility
The general configuration and relative position of the facilities provided for mounting the item.
rectangular single mounting facility
The designation that identifies the schematic diagram of the electrical configuration of the main nonpile-up contacts including the number of poles or forms.
3 pole, single throw, normally open, double make, momentary action
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
200.0 milliamperes ac single winding
The designation that identifies the schematic diagram of the electrical configuration of the auxiliary nonpile-up contacts including the number of poles or forms.
1 two circuit, double break/double make, one position momentary
The highest voltage at which the auxiliary contacts are rated for normal operation,expressed in volts.
115.0 ac and 28.0 dc
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
115.0 volts ac 25 deg celsius single winding
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
100.0 amperes ac motor load and 100.0 amperes dc motor load
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
100.0 amperes ac resistive load and 150.0 amperes dc resistive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
416.0 ac and 28.0 dc
The amount of current the auxiliary contacts are rated to make or break at maximum rated voltage,with a specified load.
10.0 amperes ac resistive load and 10.0 amperes dc resistive load
The amount of current the auxiliary contacts are rated to make or break at maximum rated voltage,with a specified load.
3.0 amperes ac lamp load and 3.0 amperes dc lamp load
The amount of current the auxiliary contacts are rated to make or break at maximum rated voltage,with a specified load.
5.0 amperes ac motor load and 5.0 amperes dc motor load
Indicates the type and number of terminals for providing electrical connection.
12 threaded stud all functions
Answers.
4.156 inches maximum
Schedule B number: 8536490075
nmfc 061300
Relays, electromechanical, for a voltage exceeding 60 v but not exceeding 1,000 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-755-4778 RELAY,ELECTROMAGNETIC
4.156" overall width 4.343" overall length
- NIIN
- 007554778
- NIIN Date
- 03/31/72
- Schedule B
- 8536490075
- Name Code
- 32512
- FIIG
- A03300
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | A419-063394-00 | Cage 73949 |
Major End Users Countries and entities
- - Spain
- - Singapore
- - Greece
Availability for 128C849H01 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
128C849H01 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
