Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 1224314 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a single mounting facility
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
3.000in. ⁓3-1/64"
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
1.750in. single mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
1.125in. single mounting facility
The distance measured in a straight line from the bottom to the top of an item.
2.560in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.710in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic
The number of individual /not electrically connected/ windings.
1
The number of coils included on the item.
1
The measured opposition to the flow of direct current offered by the item winding.
70.0 ohms single winding
Indicates the type of duty provided.
continuous
Indicates the type and number of facilities by which the item is mounted.
4 threaded stud single mounting facility
The number and combination(s) of the basic contact forms,in the order of assemblage,which make up the switching structure of the pile-up main contacts.
2A1C
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32 single mounting facility
A designation that is used for the purpose of general identification of the thread.
0.138in. single mounting facility ⁓9/64"
The general configuration and relative position of the facilities provided for mounting the item.
rectangular single mounting facility
The required current value,applied to the energizing element,at which the switching mechanism or actuator element must have assumed a fully operated position.
340.0 milliamperes dc single winding
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.02 seconds fixed operate time
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
0.98 seconds fixed release time
The amount and type of voltage required at designated temperature to be applied to the input or energizing element of the item to ensure normal operation of the switching elements.
24.0 volts dc 25 deg celsius single winding
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
1.0 amperes dc resistive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
750.0 dc
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
all contacts located within 1-1/2 in. dia circle located on base
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc single mounting facility
Indicates the type and number of terminals for providing electrical connection.
9 pin all functions
Answers.
1EA
Unc single mounting facility
32 single mounting facility
1.710 inches
2a single mounting facility
Schedule B number: 8536490050
Relays, electromechanical, with contacts rated at less than 10 a, for a voltage exceeding 60 v but not exceeding 1000 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-00-518-8218 RELAY,ELECTROMAGNETIC
unc single mounting facility thread series all contacts located within 1-1/2 in. dia circle located on base 32 single mounting facility thread quantity per inch 1.710" overall width 3.000" overall length 2a single mounting facility thread class
- NIIN
- 005188218
- NIIN Date
- 01/01/63
- Schedule B
- 8536490050
- Name Code
- 32512
- FIIG
- A03300
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $28.40 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | C4209A | Cage 71607 |
Major End Users Countries and entities
- - Spain
- - Italy
Availability for 1224314 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
1224314 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
