Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 100-598 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
92.964 mm
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
38.100 mm second mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the length.
76.200 mm first mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
27.559 mm second mounting facility
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
31.750 mm first mounting facility
The distance measured in a straight line from the bottom to the top of an item.
91.546 mm
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
55.372 mm
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
steel, corrosion resisting
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
hermetic and heat resistant and shock resistant and vibration resistant
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
5.130 mm first mounting facility and 5.384 mm first mounting facility
The national stock number or the identification information of the end equipment for which the item is a part.
an/FPS-117, radar set
The cycles per second /hertz/ of the alternating current.
54.7 or 65.5
Indicates the type and number of facilities by which the item is mounted.
4 unthreaded hole first mounting facility
Indicates the type and number of facilities by which the item is mounted.
1 electrical plug connector second mounting facility
The general configuration and relative position of the facilities provided for mounting the item.
rectangular first mounting facility
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
2.00 seconds fixed release time
The interval for which the item,by design,is purposely delayed between introduction of power into the energizing element and completion of travel of the contact carrier,and/or between interruption of the energizing power and return of the contact carrier to its normal de-energizing position.
4.00 seconds fixed operate time
The amount of current the main contacts are rated to make or break at maximum rated voltage,with a specified load.
10.0 amperes dc resistive load
The highest voltage at which the main contacts are rated for normal operation,expressed in volts.
28.0 dc
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
manuf.name, power monitor; used to sense line voltage, frequency and phase sequence of three phase y power lines under voltage pickup line to neutral 105 vrms + - 2 percent, overvoltage drop out line to neutral 135 vrms + - 2percent
Indicates the type and number of terminals for providing electrical connection.
1 connector, plug all functions
Answers.
1EA
55.372 millimeters maximum
Schedule B number: 8536410020
nmfc 061300
Relays, electromechanical, with contacts rated less than 10 a, for a voltage not exceeding 60 v
FSC 5945 ⁓ Relays and solenoids
Excluding contractors.
NSN 5945-01-437-6240 RELAY,ELECTROMAGNETIC
Used on an/fps-117,radar set. manuf.name, power monitor; used to sense line voltage, frequency 55.372mm overall width 92.964mm overall length
- NIIN
- 014376240
- NIIN Date
- 10/18/96
- Schedule B
- 8536410020
- Name Code
- 32512
- FIIG
- A03300
- Item Weight
- 0.000lbs
- Item Dimensions
- QUP
- 1
- Historical Price
- $6,081.90 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- Has ESD sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 77A106243 | Cage 03538 |
| 2. | 77A106243 | Cage 03538 |
| 3. | 77A106243 | Cage 03538 |
| 4. | 77A106243 | Cage 03538 |
| 5. | 77A106243 | Cage 03538 |
Major End Users Countries and entities
- - Department of The Air Force
- - Canada
Availability for 100-598 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other relays with similar characteristics
Nothing similar to this part number was found in our inventory
100-598 / Relay,electromagneticWhat is the formal definition of this item?
A relay which is actuated by the effect of a magnetic field developed by the current in its energizing coil(s). includes solenoid and armature types. excludes contactor, magnetic; relay, meter movement; relay, motor driven; relay, reed; relay, resonant reed; relay, rotary; and switch, stepping.
