Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. M85049/87-24P02 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2b
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
2.313in. ⁓2-21/64"
The distance measured in a straight line from the bottom to the top of an item.
2.864in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.889in.
The angle the end/s/ or legs deviate from the centerline of the inlet end,expressed in degrees.
90.0
The national stock number or the identification information of the end equipment for which the item is a part.
anti surf imp
The length of a straight line which passes through the center of the cable opening,and terminates at the circumference.
0.750in.
The number of openings designed to accommodate a cable.
1
A designation indicating the size by which the item is commercially known and/or identified.
24
Indicates the type and number of facilities by which the item is mounted.
1 threaded coupling
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
A designation that is used for the purpose of general identification of the thread.
1.438in. ⁓1-29/64"
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
SELF-Locking, band shield termination, shrink sleeve accommodation, selective plating, for MIL-DTL-38999 series i and ii connectors
The chemical compound or mechanical mixture properties of which the item is fabricated.
aluminum alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
cadmium and nickel
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
angle type
Consists of plating,dip,and/or coating that cannot be wiped off.plating and/or coating is any chemical and/or metallic additive,electrochemical,or mild mechanical process which protects a surface.
cadmium and nickel, electroless
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-C-85049/87 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef
The document designator of the specification or standard which established the item of supply.
81349-MIL-C-85049/87 government specification
Answers.
1EA
Unef
Angle type
Aluminum alloy
18
1.889 inches
Right-hand
2b
Schedule B number: 8548900100
nmfc 061680
Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-479-1777 BACKSHELL,ELECTRICAL CONNECTOR
Used on anti surf imp. unef thread series angle type cadmium surface treated self-locking, band shield termination, shrink sleeve accommodation, selective plating, for mil-dtl-38999 series i 18 thread quantity per inch 1.889" overall width 2.313" overall length right-hand 2b thread class
- NIIN
- 014791777
- NIIN Date
- 10/13/00
- Schedule B
- 8548900100
- Name Code
- 67169
- FIIG
- A10100
- Item Weight
- 0.000lbs
- Item Dimensions
- 23 X 19 X 29
- QUP
- 1
- Historical Price
- $192.83 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | AS85049 | Cage 81343 |
| 2. | MIL-C-85049 | Cage 81349 |
Major End Users Countries and entities
- - Department of The Navy
- - Netherlands
Availability for M85049/87-24P02 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical cable
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other backshells with similar characteristics
Nothing similar to this part number was found in our inventory
M85049/87-24P02 / Backshell,electrical connectorWhat is the formal definition of this item?
An item specifically designed to be placed around that portion of a connector, receptable, electrical or connector, plug, electrical which contains the facilities for attaching wires or cables. it may be designed to provide the necessary accomodations between an electrical cable clamping device and an electrical connector shell, or it may include the clamping device. it may be used for shielding against electrical interference, mechanical injury, or physical damage due to environmental conditions.
