Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 7-93001 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
3a
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.182in. ⁓3/16"
The distance measured in a straight line from the bottom to the top of an item.
0.500in.
A measurement of the smallest dimension of the material,in distinction from length or width.
0.070in.
The number of mounting devices used as a means of attaching the item.
1
The means by which the item is sealed.
compression
The length of a straight line which passes through the center of the body,and terminates at the outside circumference.
0.385in.
The length of a straight line which passes through the center of a base,and terminates at the outside circumference.
0.385in.
The means of attaching the item.
integral threaded nut
The length of a straight line which passes through the center of the two surfaces of a circular opening,and terminates at the inside circumference.
0.062in.
A designation indicating the diameter-pitch combination and the number of threads per measurement scale applied to a series of diameters.
unef
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
40
A designation that is used for the purpose of general identification of the thread.
0.164in. ⁓11/64"
Indicates the location of the thread on the base.
internal
The chemical compound or mechanical mixture properties of which the item is fabricated.
rubber silicone body
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
THRU-Hole
The justification for the assignment of a federal supply class /fsc/ to an item based on the classification of the next higher classifiable assembly.
switch, push
Answers.
1EA
Thru-hole
Rubber silicone body
40
0.070 inches
0.182 inches
3a
Schedule B number: 8538907080
nmfc 061300
Parts suitable for use solely or principally with the apparatus for heading 8535, 8536,8537
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-00-461-7761 BOOT,DUST AND MOISTURE SEAL
thru-hole 40 thread quantity per inch 0.070" material thickness 0.182" thread length 3a thread class
- NIIN
- 004617761
- NIIN Date
- 05/12/69
- Schedule B
- 8538907080
- Name Code
- 19302
- FIIG
- A02000
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $25.18 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Air Force
Availability for 7-93001 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other boots with similar characteristics
Nothing similar to this part number was found in our inventory
7-93001 / Boot,dust and moisture sealWhat is the formal definition of this item?
A flexible, nonmetallic item designed to prevent entry of dust, moisture and other contaminants into critical areas around shafts, levers, electrical wires and hoses. sealing may be either static or dynamic. the item may include mounting hardware (support plates, clamps and the like). excludes bellows, protection; grommet, nonmetallic; and cable nipple, electrical. see also cap, electrical; cap, protective, dust and moisture seal; and shield, electrical connector.
