Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. DS07-27S-702A specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
4.300in. ⁓4-5/16"
The distance measured in a straight line from the bottom to the top of an item.
1.500in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.500in.
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
moisture proof and salt water resistant and vibration proof and thermal shock resistant and corrosion resistant
Indicates the type of threaded device included on the item.
coupling facility
The number of mating ends provided with the item which are designed to accommodate another connector.
2
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
20-27 1st mating end
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
27 2nd mating end
An indication of whether or not the contact(s) is removable.
nonremovable 1st mating end single contact grouping
An indication of whether or not the contact(s) is removable.
removable 2nd mating end single contact grouping
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
22.0 1st mating end single contact grouping
The maximum current which the contact may continuously carry without degradation or destruction,expressed in amperes.
7.5 2nd mating end single contact grouping
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.
500.0 1st mating end single contact grouping
The maximum direct current potential that may be applied continuously to the contact without damage,expressed in volts.
700.0 1st mating end single contact grouping
The means used to prevent mismating or cross plugging of contacts.
keyway or multiple keyway
The amount of clockwise displacement of the indexing radius of the insert from normal position,expressed in degrees.
0.0
Indicates the type of shell included on the item.
solid
The means used to secure a connector to its mating counterpart.
externally threaded shell and detent
The national stock number or the identification information of the end equipment for which the item is a part.
special project era
A nominal measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
0.625in.
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
18
A designation that is used for the purpose of general identification of the thread.
1.250in. ⁓1-1/4"
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the contact surface treatment material.
MIL-G-45204, ty 2, gr c, cl 1 mil spec 1st treatment response 2nd mating end single contact grouping and QQ-N-290, cl 2 fed spec 2nd treatment response 2nd mating end single contact grouping
The chemical compound or mechanical mixture properties of which the shell is fabricated.
aluminum alloy 2017 or aluminum alloy 2014 and aluminum alloy
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the shell surface/s/ and cannot be wiped off.
chromate and cadmium
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like that identifies the shell surface treatment material.
QQ-P-416, ty 2, cl 3 fed spec all treatment responses
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the shell material.
QQ-A-225 fed spec 1st material response or QQ-A-225 fed spec 2nd material response and QQ-A-591 fed spec 3rd material response
The number of contacts included with the item which provides electrical connection.
14 1st mating end single contact grouping
The number of contacts included with the item which provides electrical connection.
27 2nd mating end single contact grouping
Indicates the type of contact(s) included with the item.
round pin 1st mating end single contact grouping
Indicates the type of contact(s) included with the item.
round socket 2nd mating end single contact grouping
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
contact adapter 57A23B125 will be in pin e of MS3102R20-27P connector; item supplied with conductive adhesive and thread sealing compound applied to threads of 67A274A330 connector; the following contacts are wired together from one connector to the other, a to 1, b to 15, c to 6, e to 16 and 18, i to 26, j to 9, l to 7, m to 19
An indication of the precious material and its location in the item.
contact surfaces gold
An indication of the precious material contained in the item,and the amount per a measurement scale.
0.041 gold grains, troy
Identification of the precious material contained in the item.
gold
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef
Answers.
1EA
Unef
18
1.500 inches
Right-hand
2a
Schedule B number: 8548900100
nmfc 061680
Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-298-2011 ADAPTER,CONNECTOR
Used on special project era. unef thread series contact adapter 57A23B125 will be in pin e of MS3102R20-27p connector; item supplied with conductive adhesive 18 thread quantity per inch 1.500" overall width 4.300" overall length right-hand 2a thread class
- NIIN
- 012982011
- NIIN Date
- 04/13/89
- Schedule B
- 8548900100
- Name Code
- 15091
- FIIG
- A039B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $332.45 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 67A274C207 | Cage 30003 |
Major End Users Countries and entities
- - Department of The Navy
Availability for DS07-27S-702A A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other adapters with similar characteristics
Nothing similar to this part number was found in our inventory
DS07-27S-702A / Adapter,connectorWhat is the formal definition of this item?
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. it is not designed for permanent attachment to a cable, cord, coaxial line, or wire. the physical shape of an electrical connector should not be the determining factor of its name. tee, angle, straight, and y-shaped adapters are all adapter, connector. excludes adapter, connector to lampbase; adapter, lampholder to connector; adapter (1), cable clamp to connector; and adapter, lampholder. for items designed as a mechanical connection between an electrical conduit and an electrical connector, see adapter (1), electrical conduit.
