Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 16179 specification
A numeric-alpha designator indicating the pitch diameter tolerance and an external or internal thread.
2a
The direction of the thread when viewed axially. a right-hand thread winds in a clockwise direction while a left-hand thread winds in a counterclockwise direction.
RIGHT-Hand
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
straight shape, external/internal coupling
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.312in. ⁓1-5/16"
A measurement of the longest straight line across a circular cross-sectional plane.
0.593in. ⁓19/32"
The environmental elements or conditions that an item is designed or protected to resist or withstand satisfactorily.
vibration resistant and corrosion resistant and moisture resistant and shock resistant
Indicates the type of threaded device included on the item.
coupling facility
The number of mating ends provided with the item which are designed to accommodate another connector.
2
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
bnc 1st mating end
The style designation indicating the configuration that most nearly corresponds to the arrangement of the contact position/s/.
sma 2nd mating end
An indication of whether or not the contact(s) is removable.
nonremovable all mating ends single contact grouping
The maximum alternating current potential that may be applied continuously to the contact without damage,expressed in volts.
335.0 all mating ends single contact grouping
The maximum frequency at which the contact is rated.
4000.0 megahertz all mating ends single contact grouping
Indicates the type of shell included on the item.
solid
The means used to secure a connector to its mating counterpart.
bayonet pin and externally threaded shell
The impedance for which the item is designed for maximum power transfer,expressed in ohms.
50.0 all mating ends single contact grouping
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
36
A designation that is used for the purpose of general identification of the thread.
0.250in. ⁓1/4"
The chemical compound or mechanical mixture properties of which the contact is fabricated.
copper alloy all mating ends single contact grouping
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the contact surface(s) and cannot be wiped off.
gold all mating ends single contact grouping
The specification,standard,or manufacturers reference,and the classification designation,such as type,class,grade,and the like,that identifies the contact surface treatment material.
MIL-G-45204, ty 2, grade c, cl 1 mil spec single treatment response all mating ends single contact grouping
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the contact material.
QQ-C-530 fed spec single material response all mating ends single contact grouping or QQ-C-533 fed spec single material response all mating ends single contact grouping
The chemical compound or mechanical mixture properties of which the shell is fabricated.
steel
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the shell material.
QQ-A-225/6 fed spec single material response
The number of contacts included with the item which provides electrical connection.
1 all mating ends single contact grouping
Indicates the type of contact(s) included with the item.
coaxial socket all mating ends single contact grouping
An indication of the precious material and its location in the item.
contact surfaces gold
An indication of the precious material contained in the item,and the amount per a measurement scale.
0.010 gold grains, troy
Identification of the precious material contained in the item.
gold
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-C-55339 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns
The document designator of the specification or standard which established the item of supply.
81349-MIL-C-55339/46 government specification
Answers.
Uns
36
Right-hand
2a
Schedule B number: 8548900100
nmfc 061680
Electrical parts of machinery or apparatus not specified or included elsewhere in chapter 85
FSC 5935 ⁓ Connectors, electrical
Excluding interconnectors, fiber optic
NSN 5935-01-165-9946 ADAPTER,CONNECTOR
uns thread series 36 thread quantity per inch 1.312" overall length right-hand 2a thread class
- NIIN
- 011659946
- NIIN Date
- 11/05/83
- Schedule B
- 8548900100
- Name Code
- 15091
- FIIG
- A039B0
- Item Weight
- 0.000lbs
- Item Dimensions
- 13 X 6 X 6
- QUP
- Historical Price
- $69.25 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | M55339/46-30001 | Cage 81349 |
| 2. | MIL-C-55339/46 | Cage 81349 |
| 3. | M55339/46-30001 | Cage 95077 |
| 4. | 77C714209P001 | Cage 03538 |
| 5. | 879-11-16MA9 | Cage 91836 |
Major End Users Countries and entities
- - National Aeronautics And Space Administration
- - Department of The Navy
- - Department of The Army
- - Department of The Air Force
- - National Security Agency
- - Defense Logistics Agency
- - Federal Aviation Administration
- - U.s. Coast Guard
- - Poland
- - Spain
- - Saudi Arabia
- - Australia
- - Canada
- - New Zealand
- - Germany
- - Republic of Korea
- - Greece
- - Turkey
Availability for 16179 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061680 ELEC WIRING PLUGS ETC
- UFC (universal freight code)
- 34570
Similar by Design Other adapters with similar characteristics
Nothing similar to this part number was found in our inventory
16179 / Adapter,connectorWhat is the formal definition of this item?
An adapter with electrical contacts which provides facilities for joining two or more electrical connectors, whose design or function will not normally warrant their junction. it is not designed for permanent attachment to a cable, cord, coaxial line, or wire. the physical shape of an electrical connector should not be the determining factor of its name. tee, angle, straight, and y-shaped adapters are all adapter, connector. excludes adapter, connector to lampbase; adapter, lampholder to connector; adapter (1), cable clamp to connector; and adapter, lampholder. for items designed as a mechanical connection between an electrical conduit and an electrical connector, see adapter (1), electrical conduit.
