Serving our customers with quality and safety first.
salt spray resistant
4.284in. ⁓4-19/64"
1.770in.
1.150in.
0.100in. single mounting facility
7
4.114in. single mounting facility
0.900in. single mounting facility
-65.0/+155.0 deg fahrenheit
bracket single mounting facility and unthreaded hole single mounting facility
thumbwheel all actuators
28.0 ac at sea level
28.0 dc at sea level
four position rectangular single mounting facility
10 3rd actuator
10 4th actuator
10 5th actuator
10 6th actuator
10 7th actuator
6 2nd actuator
6 1st actuator
printed circuit
125.0 milliamperes resistive load ac at sea level
125.0 milliamperes resistive load dc at sea level
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 3rd section
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 4th section
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 5th section
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 6th section
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 7th section
7, 8, 8, 8, 8, 8 1st section
9, 0, 1, 2, 3, 4 2nd section
bcd, 1 pole - 10 positions 2nd section
bcd, 1 pole - 10 positions 3rd section
bcd, 1 pole - 10 positions 4th section
bcd, 1 pole - 10 positions 5th section
bcd, 1 pole - 10 positions 6th section
bcd, 1 pole - 10 positions 7th section
special 1st section
80063-special 1st section
decimal point between station 4 and 5; station 1 granged to station 2
black each indicator background
black single body
white each indicator marking
rectangular inline indicating
1EA
Rectangular inline indicating
1.150 inches
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
rectangular inline indicating decimal point between station 4 1.150" overall width 4.284" overall length
1. | 07-C-0084 | Cage 07126 |
2. | 7-C-84 | Cage 07126 |
Nothing similar to this part number was found in our inventory
A switch which is externally actuated by a thumbwheel and/or pushbutton. a legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. may have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.