Serving our customers with quality and safety first.
2.760in. ⁓2-49/64"
1.395in.
1.150in.
4
flange single mounting facility
thumbwheel all actuators
28.0 ac at sea level
28.0 dc at sea level
10 2nd actuator
10 3rd actuator
10 4th actuator
2 1st actuator
wire lead
125.0 milliamperes resistive load ac at sea level
125.0 milliamperes resistive load dc at sea level
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 2nd section
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 3rd section
0, 1, 2, 3, 4, 5, 6, 7, 8, 9 4th section
2, 3 1st section
9's complement bcd, 1 pole - 10 positions each section
natural each body
rectangular inline indicating
66948-2001103 manufacturers specification control
1EA
Rectangular inline indicating
1.150 inches
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
rectangular inline indicating 1.150" overall width 2.760" overall length
1. | 2001103-003 | Cage 66948 |
Nothing similar to this part number was found in our inventory
A switch which is externally actuated by a thumbwheel and/or pushbutton. a legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. may have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.