Serving our customers with quality and safety first.
shock resistant and vibration resistant and explosion proof
6.256in. and 6.316in. ⁓6-21/64"
1.585in.
1.120in. and 1.180in.
0.100in. 2nd mounting facility
11
6.099in. 2nd mounting facility and 6.129in. 2nd mounting facility
0.890in. 2nd mounting facility and 0.910in. 2nd mounting facility
-65.0/+85.0 deg celsius
printed circuit 1st mounting facilitybracket 2nd mounting facility and unthreaded hole 2nd mounting facility
thumbwheel all actuators
metallic inclosure
28.0 ac at sea LEVEL28.0 dc at sea level
four position rectangular 2nd mounting facility
10 all actuators
printed circuit
cc, cf, cj, fc, ff, fj, jc, jf, jj 1st sectioncc, cf, cj, fc, ff, fj, jc, jf, jj 2nd sectioncc, cf, cj, fc, ff, fj, jc, jf, jj 3rd sectioncc, cf, cj, fc, ff, fj, jc, jf, jj 4th sectioncc, cf, cj, fc, ff, fj, jc, jf, jj 5th sectioncc, cf, cj, fc, ff, fj, jc, jf, jj 6th SECTION0, 1, 2, 3, 4, 5, 6, 7, 8, 9 7th SECTION0, 1, 2, 3, 4, 5, 6, 7, 8, 9 8th SECTION0, 1, 2, 3, 4, 5, 6, 7, 8, 9 9th SECTION0, 1, 2, 3, 4, 5, 6, 7, 8, 9 10th SECTION0, 1, 2, 3, 4, 5, 6, 7, 8, 9 11th section
special 1st sectionspecial 2nd sectionspecial 3rd sectionspecial 4th sectionspecial 5th sectionspecial 6th sectiondecimal, 1 pole - 10 positions 7th sectiondecimal, 1 pole - 10 positions 8th sectiondecimal, 1 pole - 10 positions 9th sectiondecimal, 1 pole - 10 positions 10th sectiondecimal, 1 pole - 10 positions 11th section
white 1st bodywhite 2nd bodyblack 3rd bodyblack 4th bodywhite 5th bodywhite 6th bodyblack 7th bodyblack 8th bodywhite 9th bodywhite 10th bodywhite 11th body
rectangular inline indicating
Rectangular inline indicating
1.120 inches minimum and 1.180 inches maximum
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
rectangular inline indicating 1.120" overall width 6.256" overall length
1. | 07-L-0453 | Cage 07126 |
2. | 7908664-001 | Cage 93322 |
Nothing similar to this part number was found in our inventory
A switch which is externally actuated by a thumbwheel and/or pushbutton. a legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. may have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.