Serving our customers with quality and safety first.
2b 1st mounting facility
moisture resistant
0.580in. ⁓19/32"
1.645in.
1.730in.
1.437in. 1st mounting facility
1
-30.0/+85.0 deg celsius
an/AQS-13B airborne sonae; H-3 and SH-60 helicopters
flange 1st mounting facility and threaded hole 1st mounting facility
printed circuit 2nd mounting facility
push button all actuators
illuminated and rfi shielding
56 1st mounting facility
0.086in. 1st mounting facility ⁓1/64"
125.0 ac at sea level
28.0 dc at sea level
two position IN-Line 1st mounting facility
12 all actuators
feat
printed circuit
125.0 milliamperes resistive load ac at sea level
125.0 milliamperes resistive load dc at sea level
0, 1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11 single section
binary code, 1 pole - 12 positions single section
needed for personnel safety
black single indicator marking
gray single body
white single indicator background
white single lamp
rectangular indicating
unc 1st mounting facility
1EA
Unc 1st mounting facility
Rectangular indicating
56 1st mounting facility
1.730 inches maximum
2b 1st mounting facility
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
Used on an/aqs-13b airborne sonae;h-3 and sh-60 helicopters. unc 1st mounting facility thread series rectangular indicating needed for personnel safety 56 1st mounting facility thread quantity per inch 1.730" overall width 0.580" overall length 2b 1st mounting facility thread class
1. | 2820-6 | Cage 91812 |
Nothing similar to this part number was found in our inventory
A switch which is externally actuated by a thumbwheel and/or pushbutton. a legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. may have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.