Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 07-E-0173 specification
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.150in. ⁓1-5/32"
The distance measured in a straight line from the bottom to the top of an item.
2.135in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.760in.
The number of individual sections included in the item.
1
The voltage for which the contacts are rated,expressed in volts.
28.0 dc at sea level
The number of positions to which the switch actuator may be indexed.
12 single actuator
Indicates the type of terminal for providing electrical connection to the item.
turret
The amount of current that the contacts are rated to make or break with a specified load.
125.0 milliamperes resistive load dc at sea level
An indication of the marking on the readout indicator.
high, low, fsk 1, fsk 2, fsk 3, fsk 4, fsk 5, fsk 6, fsk 7, fsk 8, fsk 9, fsk 10 single section
An indication of the precious material and its location in the item.
circuit surfaces gold
Identification of the precious material contained in the item.
gold
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
rectangular inline indicating
Answers.
1EA
Rectangular inline indicating
1.760 inches
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
NSN 5930-01-157-5979 SWITCH,CODE INDICATING WHEEL
rectangular inline indicating 1.760" overall width 1.150" overall length
- NIIN
- 011575979
- NIIN Date
- 07/08/83
- Schedule B
- 8536509065
- Name Code
- 62415
- FIIG
- A052B0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $708.63 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Contains gold
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 9999-6009-001 | Cage 50027 |
| 2. | 7-E-173 | Cage 07126 |
Major End Users Countries and entities
- - Department of The Navy
- - Canada
Availability for 07-E-0173 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other switchs with similar characteristics
Nothing similar to this part number was found in our inventory
07-E-0173 / Switch,code indicating wheelWhat is the formal definition of this item?
A switch which is externally actuated by a thumbwheel and/or pushbutton. a legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. may have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.
