Serving our customers with quality and safety first.
2.930in. ⁓2-15/16"
1.457in.
1.340in.
4
4931-01-082-1547
base single mounting facility
thumbwheel single actuator
rfi shielding
10 single actuator
wire lead
1, 2, 3, 4 single section
WATERPROOFING-Mtg. screws must betightened with a torque of 24 INCH-Ounce to provide sealing of 2-3 psig pressure, do not use LOCK-Washers
natural single body
rectangular inline indicating
1EA
Rectangular inline indicating
1.340 inches
Schedule B number: 8536509065
nmfc 061300
Switches, for a voltage not exceeding 1000 volts
FSC 5930 ⁓ Switches
Excluding switchgear.
Used on 4931-01-082-1547. rectangular inline indicating waterproofing-mtg. screws must betightened with a torque of 24 inch-ounce to provide sealing of 2-3 psig pressure, do not use lock-washers 1.340" overall width 2.930" overall length
1. | 9355938 | Cage 19200 |
2. | 7117992-1 | Cage 17863 |
3. | 2-T-56 | Cage 07126 |
4. | 9355938 | Cage 19200 |
5. | 7117992-1 | Cage 17863 |
6. | 2-T-56 | Cage 07126 |
Nothing similar to this part number was found in our inventory
A switch which is externally actuated by a thumbwheel and/or pushbutton. a legend or message is visually displayed at each position of the indicating wheel which corresponds to electrically coded output. electrically coded output is achieved by rotating a set of brush contacts permanently attached to the code indicating wheel, against a stationary commutator which is usually a printed wiring board having electrical pads or contacts which are interconnected by the rotating brush contacts. may have additional electrical components (such as resistors, capacitors, diodes) premounted on that portion of printed wiring board which extends beyond the back of switch housing.