Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. T11-2-15.0A-01-31AL-V specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
single pole type
A measurement of the longest dimension of a bushing,in distinction from width.
0.468in.
A measurement of the longest dimension of the body,in distinction from width.
1.375in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
0.680in.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
plastic
The center to center distance between terminals parallel to the length of the item.
1.125in.
1.540in.
The number of poles included in the item.
1
Indicates the type and number of facilities by which the item is mounted.
1 threaded bushing
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.
general purpose warehouse
The unusual or unique characteristic/s/ or quality/ies/ of an item which necessitates the establishment of a requirement for special handling.
magnetic
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum current load that each pole is rated to carry continuously.
15.0 amperes ac single location and 15.0 amperes dc single location
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
120.0 ac single location and 32.0 dc single location
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt,per pole,at the specified rated voltage,expressed in amperes.
1000.0 ac single location and 1000.0 dc single location
Indicates the type of electrical condition that will cause the device to trip.
overcurrent single location
The means by which the trip mechanism is released.
MAGNETIC-Hydraulic single location
Denotes the type of trip release action.
time delay single location
The continuous current rating per pole at which the device must trip in a specified time,expressed in percent.
150.0 single location
The means provided to reposition the mechanism so that the device is ready to function.
manual
Indicates the type of mechanism provided for tripping main contacts.
trip free
Indicates the type and number of actuators provided for manual control.
1 toggle
Denotes the action imparted by actuator operation.
TRIP-Reset
An indication of the designated position of the actuator.
at pole one
The basic internal electrical configuration of the trip mechanism.
series trip single location
A designation that is used for the purpose of general identification of the thread.
0.500in. ⁓1/2"
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
1.000 at 200 pct single location and 15.000 at 200 pct single location
Indicates the type of protection for which the inclosure is designed.
vibration resistant
The master requirement codes of those requirements which are technically critical by reason of tolerance,fit,performance,or other characteristics which affect identification of the item.
feat
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
hex nut
The cycles per second /hertz/ of the alternating current.
60.0 single location
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un
Indicates the type and number of terminals for providing electrical connection.
2 tab, solder lug
Answers.
1EA
Un
32
Schedule B number: 8536200040
nmfc 061300
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
NSN 5925-01-162-4001 CIRCUIT BREAKER
un thread series hex nut 32 thread quantity per inch
- NIIN
- 011624001
- NIIN Date
- 09/17/83
- Schedule B
- 8536200040
- Name Code
- 00136
- FIIG
- A030A0
- Item Weight
- 0.000lbs
- Item Dimensions
- 30 X 20 X 20
- QUP
- 1
- Historical Price
- $21.58 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 1197 | Cage U2888 |
| 2. | T11-2-15.0A-01-31AL | Cage 81541 |
Major End Users Countries and entities
- - Department of The Air Force
Availability for T11-2-15.0A-01-31AL-V A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other circuit breakers with similar characteristics
Nothing similar to this part number was found in our inventory
T11-2-15.0A-01-31AL-V / Circuit breakerWhat is the formal definition of this item?
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.
