Serving our customers with quality and safety first.
MULTIPOLE-Multiple actuator type
0.164in.
5.844in.
4.128in.
plastic
3.546in.
1.032in.
2.750in.
1.032in.
moderately rugged
0.218in.
2.609in.
4
magnetic blowout
8 threaded hole and 8 slot
general purpose warehouse
magnetic
32
40.0 amperes ac third location
40.0 amperes ac first location
40.0 amperes ac second location
250.0 ac second location
250.0 ac first location
250.0 ac third location
36.0 dc fourth location
5000.0 ac first location
5000.0 ac third location
5000.0 ac second location
overcurrent first location
overcurrent second location
overcurrent third location
undervoltage fourth location
magnetic all locations
instantaneous fourth location
time delay second location
time delay third location
time delay first location
150.0 first location
150.0 second location
150.0 third location
manual
trip free
4 toggle
TRIP-Reset
at each pole
one, two, three, and four linked
series trip all locations
0.138in. ⁓9/64"
0.300 at 200 pct first location and 100.000 at 200 pct first location
0.300 at 200 pct second location and 100.000 at 200 pct second location
0.300 at 200 pct third location and 100.000 at 200 pct third location
fungus resistant
400.0 first location
400.0 second location
400.0 third location
80063-SM-B-813283 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
unc
8 screw
1EA
Unc
32
Schedule B number: 8536200040
nmfc 061300
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
unc thread series 32 thread quantity per inch
1. | CD4-Z256-1 | Cage 74193 |
2. | CD4-Z72-1 MODIFIED | Cage 74193 |
Nothing similar to this part number was found in our inventory
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.