Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. LS10159S20 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
A measurement of the longest dimension of a bushing,in distinction from width.
0.219in. and 0.281in.
A measurement of the longest dimension of the body,in distinction from width.
2.380in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
1.094in.
A measurement from the bottom to the top of the body,in distinction from depth.
1.600in.
The center to center distance between terminals parallel to the length of the item.
0.673in. and 0.805in.
The number of poles included in the item.
3
Indicates the type and number of facilities by which the item is mounted.
1 threaded bushing
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum current load that each pole is rated to carry continuously.
20.0 amperes ac all locations
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
120.0 ac all locations
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt,per pole,at the specified rated voltage,expressed in amperes.
2000.0 ac all locations
Indicates the type of electrical condition that will cause the device to trip.
overcurrent all locations
Denotes the type of trip release action.
time delay all locations
The continuous current rating per pole at which the device must trip in a specified time,expressed in percent.
140.0 all locations
The means provided to reposition the mechanism so that the device is ready to function.
manual
Indicates the type of mechanism provided for tripping main contacts.
trip free
Indicates the type and number of actuators provided for manual control.
1 PUSH-Pull
Denotes the action imparted by actuator operation.
TRIP-Reset
A designation that is used for the purpose of general identification of the thread.
0.469in. ⁓15/32"
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
2.500 at 200 pct all locations and 40.000 at 200 pct all locations
The cycles per second /hertz/ of the alternating current.
400.0 all locations
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
uns
Indicates the type and number of terminals for providing electrical connection.
6 screw
Answers.
Uns
32
Schedule B number: 8536200040
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
NSN 5925-01-234-5780 CIRCUIT BREAKER
uns thread series 32 thread quantity per inch
- NIIN
- 012345780
- NIIN Date
- 06/16/86
- Schedule B
- 8536200040
- Name Code
- 00136
- FIIG
- A030A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 9TC20-20 | Cage 82647 |
Major End Users Countries and entities
- - United Kingdom
Availability for LS10159S20 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other circuit breakers with similar characteristics
Nothing similar to this part number was found in our inventory
LS10159S20 / Circuit breakerWhat is the formal definition of this item?
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.
