Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. AP17-1R-62-252 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
MULTIPOLE-Single actuator type
A measurement of the longest dimension of a bushing,in distinction from width.
0.625in.
A measurement of the longest dimension of the body,in distinction from width.
1.562in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
1.281in.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
metal
The center to center distance between terminals parallel to the length of the item.
0.875in.
The center to center distance between terminals parallel to the width of the item.
0.625in.
A designation that describes the basic electrical configuration of a switch.
single pole, double throw
The national stock number or the identification information of the end equipment for which the item is a part.
K10048561-501 (29355) , assembly tray
1.78in.
The number of poles included in the item.
2
Indicates the type and number of facilities by which the item is mounted.
2 threaded hole and 1 threaded bushing w/panel seal
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum current load that each pole is rated to carry continuously.
2500.0 amperes dc all locations
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
50.0 dc and 120.0 ac and 240.0 ac all locations
Indicates the type of electrical condition that will cause the device to trip.
overcurrent all locations
The means by which the trip mechanism is released.
MAGNETIC-Hydraulic all locations
Denotes the type of trip release action.
time delay all locations
The continuous current rating per pole at which the device must trip in a specified time,expressed in percent.
400.0 all locations
The ultimate time per pole in which the device must trip,expressed in seconds.
135.0 all locations
The means provided to reposition the mechanism so that the device is ready to function.
manual
Indicates the type of mechanism provided for tripping main contacts.
trip free
Indicates the type and number of actuators provided for manual control.
1 toggle
Denotes the action imparted by actuator operation.
TRIP-Reset
An indication of the designated position of the actuator.
between pole one and two
The function for which the auxiliary switch is designed and the number provided.
1 alarm
The basic internal electrical configuration of the trip mechanism.
series trip all locations
A designation that is used for the purpose of general identification of the thread.
0.138in. ⁓9/64"
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
0.8 at 200 pct and 8.0 at 200 pct all locations
Indicates the type of terminal for providing electrical connection to the switch.
tab, solder lug
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
hydraulic magnetic circuit protector, fully sealed, two pole unit, bushing plus (2) 6-32 threaded inserts, series, 50/60hz long delay, 2500 amps
The cycles per second /hertz/ of the alternating current.
50.0 or 60.0 all locations
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
un
Indicates the type and number of terminals for providing electrical connection.
4 screw
Answers.
1EA
Un
32
Schedule B number: 8536200040
nmfc 061300
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
NSN 5925-01-607-2091 CIRCUIT BREAKER
Used on k10048561-501(29355), assembly tray. un thread series hydraulic magnetic circuit protector, fully sealed, two pole unit, bushing plus (2) 6-32 threaded inserts, series, 50/60hz long delay, 2500 amps 32 thread quantity per inch
- NIIN
- 016072091
- NIIN Date
- 06/05/12
- Schedule B
- 8536200040
- Name Code
- 00136
- FIIG
- A030A0
- QUP
- 1
- Historical Price
- $553.13 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
Availability for AP17-1R-62-252 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other circuit breakers with similar characteristics
Nothing similar to this part number was found in our inventory
AP17-1R-62-252 / Circuit breakerWhat is the formal definition of this item?
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.
