Serving our customers with quality and safety first.
MULTIPOLE-Multiple actuator type
2.490in. and 2.510in.
2.960in. and 3.040in.
plastic
1.928in. and 1.948in.
0.740in. and 0.760in.
2.052in. and 2.072in.
0.740in. and 0.760in.
moderately rugged
0.130in. and 0.150in.
2.539in. and 2.683in.
4
magnetic blowout
8 threaded hole
general purpose warehouse
32
25.0 amperes ac fourth location
25.0 amperes ac second location
25.0 amperes ac third location
50.0 amperes ac first location
208.0 ac fourth location
208.0 ac second location
208.0 ac third location
250.0 ac first location
1000.0 ac fourth location
1000.0 ac second location
1000.0 ac third location
overcurrent fourth location
overcurrent second location
overcurrent third location
MAGNETIC-Hydraulic fourth location
MAGNETIC-Hydraulic second location
MAGNETIC-Hydraulic third location
time delay fourth location
time delay second location
time delay third location
125.0 fourth location
125.0 second location
125.0 third location
manual
trip free
4 toggle
TRIP-Reset
at each pole
one, two, three, and four linked
relay trip fourth location
relay trip second location
relay trip third location
0.138in. ⁓9/64"
4.100 at 200 pct fourth location and 14.000 at 200 pct fourth location
4.100 at 200 pct second location and 14.000 at 200 pct second location
4.100 at 200 pct third location and 14.000 at 200 pct third location
fungus resistant and humidity resistant and moisture resistant and shock resistant and vibration resistant
pole one is switch only
60.0 all locations
13.000 ounces
unc
8 threaded stud
1EA
Unc
32
Schedule B number: 8536200040
nmfc 061300
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
unc thread series pole one is switch only 32 thread quantity per inch
1. | CB5461R | Cage 09017 |
2. | AM0666MG6SW50-250VRC25-208V60C4 | Cage 74193 |
Nothing similar to this part number was found in our inventory
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.