Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 29-512113-1 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
MULTIPOLE-Multiple actuator type
A measurement of the longest dimension of the body,in distinction from width.
2.490in. and 2.510in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
2.960in. and 3.040in.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
plastic
The center to center distance between terminals parallel to the length of the item.
1.928in. and 1.948in.
The center to center distance between terminals parallel to the width of the item.
0.740in. and 0.760in.
The distance between centerlines of mounting facilities parallel to the length of the item.
2.052in. and 2.072in.
A designation that describes the basic electrical configuration of a switch.
single pole, double throw
The distance between centerlines of mounting facilities parallel to the width of the item.
0.740in. and 0.760in.
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
moderately rugged
0.130in. and 0.150in.
2.403in. and 2.533in.
The number of poles included in the item.
4
The means of quenching an arc.
magnetic blowout
Indicates the type and number of facilities by which the item is mounted.
8 threaded hole
Indicates the type of storage space required for an item in order to provide the degree of protection necessary to maintain serviceability standards.
general purpose warehouse
The unusual or unique characteristic/s/ or quality/ies/ of an item which necessitates the establishment of a requirement for special handling.
magnetic
Those features,not otherwise specified,which may be required for proper functioning of the item.
high inrush protection
The number of threads on the item per linear inch measured on a line parallel to the thread axis.
32
The maximum current load that each pole is rated to carry continuously.
20.0 amperes ac second location
The maximum current load that each pole is rated to carry continuously.
20.0 amperes ac third location
The maximum current load that each pole is rated to carry continuously.
20.0 amperes ac first location
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
24.0 dc fourth location
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
240.0 ac second location
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
240.0 ac first location
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
240.0 ac third location
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt,per pole,at the specified rated voltage,expressed in amperes.
1000.0 ac first location
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt,per pole,at the specified rated voltage,expressed in amperes.
1000.0 ac second location
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt,per pole,at the specified rated voltage,expressed in amperes.
1000.0 ac third location
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt,per pole,at the specified rated voltage,expressed in amperes.
1000.0 dc fourth location
Indicates the type of electrical condition that will cause the device to trip.
overcurrent all locations
The means by which the trip mechanism is released.
MAGNETIC-Hydraulic all locations
Denotes the type of trip release action.
time delay all locations
The continuous current rating per pole at which the device must trip in a specified time,expressed in percent.
130.0 all locations
The means provided to reposition the mechanism so that the device is ready to function.
manual
Indicates the type of mechanism provided for tripping main contacts.
trip free
Indicates the type and number of actuators provided for manual control.
4 toggle
Denotes the action imparted by actuator operation.
TRIP-Reset
An indication of the designated position of the actuator.
at each pole
Indicates the arrangement of the externally connected actuators.
one, two, three, and four linked
The function for which the auxiliary switch is designed and the number provided.
1 alarm
The basic internal electrical configuration of the trip mechanism.
series trip w/auxiliary load terminal first location
The basic internal electrical configuration of the trip mechanism.
series trip fourth location
The basic internal electrical configuration of the trip mechanism.
series trip second location
The basic internal electrical configuration of the trip mechanism.
series trip third location
A designation that is used for the purpose of general identification of the thread.
0.138in. ⁓9/64"
Indicates the location of the switch in relation to its designated position.
internal at pole one
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
2.000 at 200 pct second location and 20.000 at 200 pct second location
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
2.000 at 200 pct first location and 20.000 at 200 pct first location
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
2.000 at 200 pct third location and 20.000 at 200 pct third location
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
0.150 at 200 pct fourth location and 1.500 at 200 pct fourth location
Indicates the type of protection for which the inclosure is designed.
fungus resistant and moisture resistant
Indicates the type of terminal for providing electrical connection to the switch.
tab, solder lug
The amount of current,expressed in amperes,and the type for which the switch is rated.
10.0 ac and 4.0 dc
The voltage,expressed in volts,and current type for which the switch is rated.
250.0 ac and 30.0 dc
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
high inrush pole one only and pole four is a remote voltage trip application
The cycles per second /hertz/ of the alternating current.
400.0 first location
The cycles per second /hertz/ of the alternating current.
400.0 second location
The cycles per second /hertz/ of the alternating current.
400.0 third location
The measured weight of an item unencumbered by packaging or packing material.
12.312 pounds
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
04655-29-512113 standard (includes industry or association standards, individual manufactureer standards, etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unc
Indicates the type and number of terminals for providing electrical connection.
9 threaded stud
Answers.
1EA
Unc
32
Schedule B number: 8536200040
nmfc 061300
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
NSN 5925-01-159-6599 CIRCUIT BREAKER
unc thread series high inrush pole one only 32 thread quantity per inch
- NIIN
- 011596599
- NIIN Date
- 08/11/83
- Schedule B
- 8536200040
- Name Code
- 00136
- FIIG
- A030A0
- Item Weight
- 1.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $441.73 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | AM4-Z82-1 | Cage 74193 |
Major End Users Countries and entities
- - Defense Logistics Agency
Availability for 29-512113-1 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other circuit breakers with similar characteristics
Nothing similar to this part number was found in our inventory
29-512113-1 / Circuit breakerWhat is the formal definition of this item?
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.
