Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 205-11-1REC2-42F-3-501A-M-O specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
MULTIPOLE-Multiple actuator type
A measurement of the longest dimension of the body,in distinction from width.
2.490in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
1.500in.
The element,compound,or mixture of which the case is fabricated,excluding any surface treatment.
plastic
The center to center distance between terminals parallel to the length of the item.
1.940in.
The center to center distance between terminals parallel to the width of the item.
0.750in.
The distance between centerlines of mounting facilities parallel to the length of the item.
2.060in.
A designation that describes the basic electrical configuration of a switch.
single pole, double throw
The distance between centerlines of mounting facilities parallel to the width of the item.
0.750in.
0.150in.
2.755in.
The number of poles included in the item.
2
Indicates the type and number of facilities by which the item is mounted.
4 threaded hole
Those features,not otherwise specified,which may be required for proper functioning of the item.
high inrush protection
The maximum current load that each pole is rated to carry continuously.
0.5 amperes ac all locations
Indicates the type and value of operating voltage for which each pole is designed to operate,expressed in volts.
120.0 ac all locations
Indicates the type and value of the maximum short circuit current that the item will successfully interrupt,per pole,at the specified rated voltage,expressed in amperes.
1500.0 ac all locations
Indicates the type of electrical condition that will cause the device to trip.
overcurrent all locations
The means by which the trip mechanism is released.
MAGNETIC-Hydraulic all locations
Denotes the type of trip release action.
time delay all locations
The continuous current rating per pole at which the device must trip in a specified time,expressed in percent.
150.0 all locations
The ultimate time per pole in which the device must trip,expressed in seconds.
5.000 all locations and 60.000 all locations
The means provided to reposition the mechanism so that the device is ready to function.
manual
Indicates the type of mechanism provided for tripping main contacts.
trip free
Indicates the type and number of actuators provided for manual control.
2 toggle
Denotes the action imparted by actuator operation.
TRIP-Reset
An indication of the designated position of the actuator.
at each pole
Indicates the arrangement of the externally connected actuators.
one and two linked
The function for which the auxiliary switch is designed and the number provided.
1 control
The basic internal electrical configuration of the trip mechanism.
series trip all locations
A designation that is used for the purpose of general identification of the thread.
3.0 mm
The working period which the trip release is designed to operate.
continuous all locations
A measurement of distance between corresponding points on two adjacent threads measured parallel to the thread axis,expressed in millimeters.
0.50
Indicates the location of the switch in relation to its designated position.
internal at pole one
The length of time,expressed in seconds,that an overload may exist before the device will trip at a specified continuous current.
5.000 at 150 pct all locations and 60.000 at 150 pct all locations
Indicates the type of protection for which the inclosure is designed.
dustproof
Indicates the type of terminal for providing electrical connection to the switch.
quick disconnect, male
The amount of current,expressed in amperes,and the type for which the switch is rated.
10.0 ac
The voltage,expressed in volts,and current type for which the switch is rated.
250.0 ac
The cycles per second /hertz/ of the alternating current.
400.0 all locations
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81541-2002 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
A designation distinguishing one group of thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
iso s
Indicates the type and number of terminals for providing electrical connection.
4 threaded stud
Answers.
Iso s
Schedule B number: 8536200040
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
NSN 5925-01-175-5720 CIRCUIT BREAKER
iso s thread series
- NIIN
- 011755720
- NIIN Date
- 04/03/84
- Schedule B
- 8536200040
- Name Code
- 00136
- FIIG
- A030A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - France
Availability for 205-11-1REC2-42F-3-501A-M-O A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other circuit breakers with similar characteristics
Nothing similar to this part number was found in our inventory
205-11-1REC2-42F-3-501A-M-O / Circuit breakerWhat is the formal definition of this item?
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.
