Serving our customers with quality and safety first.
MULTIPOLE-Multiple actuator type
2.490in. and 2.510in.
2.990in. and 3.010in.
plastic
1.928in. and 1.948in.
0.740in. and 0.760in.
2.052in. and 2.072in.
0.740in. and 0.760in.
moderately rugged
0.130in. and 0.150in.
2.461in. and 2.481in.
4
magnetic blowout
8 threaded hole
general purpose warehouse
magnetic
32
50.0 amperes ac second location
50.0 amperes ac third location
50.0 amperes ac first location
120.0 dc fourth location
250.0 ac second location
250.0 ac first location
250.0 ac third location
1000.0 ac first location
1000.0 ac second location
1000.0 ac third location
overcurrent first location
overcurrent second location
overcurrent third location
undervoltage fourth location
MAGNETIC-Hydraulic second location
MAGNETIC-Hydraulic third location
MAGNETIC-Hydraulic first location
instantaneous fourth location
time delay second location
time delay third location
time delay first location
125.0 first location
125.0 second location
125.0 third location
manual
trip free
4 toggle
TRIP-Reset
at each pole
one, two, three, and four linked
series trip first location
relay trip fourth location
series trip second location
series trip third location
0.138in. ⁓9/64"
2.000 at 200 pct second location and 20.000 at 200 pct second location
2.000 at 200 pct first location and 20.000 at 200 pct first location
2.000 at 200 pct third location and 20.000 at 200 pct third location
fungus resistant and moisture resistant
400.0 first location
400.0 second location
400.0 third location
12.500 ounces
unc
10 threaded stud
1EA
Unc
32
Schedule B number: 8536200040
nmfc 061300
Automatic circuit breakers, for a voltage not exceeding 1,000 v
FSC 5925 ⁓ Circuit breakers
Excluding relays.
unc thread series 32 thread quantity per inch
1. | APL1111-6584-1 | Cage 81541 |
2. | AM4-Z5-2 | Cage 74193 |
Nothing similar to this part number was found in our inventory
A device with means other than fuses for automatically opening the circuit in which it is installed when the current varies from the predetermined value for which the device is set. may include provisions for manual operation. at least one set of contacts must be in series with the actuating element(s). a combination of semiconductor and passive devices may be used in lieu of contacts. for automatically operated items in which the actuating (tripping) element and contacts are not in series, see relay (as modified). for items which are operated both manually and automatically but the actuating elements and contact are not in series, see relay-switch. excludes circuit breaker box and magneto "breaker" assemblies. see also switch (as modified); and controller.