Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. Q02L40F WITH 2 EACH Q0120 specification
An overall measurement between specified points of an item,in distinction from height.
3.000in.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the width.
2.813in.
The distance measured in a straight line from the bottom to the top of an item.
6.125in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
3.813in.
The length of a straight line which passes through the center of an unthreaded mounting hole,and terminates at the circumference.
0.196in.
The distance between the center of one mounting facility and the center of the adjacent mounting facility parallel to the height.
5.125in.
A designation of the standard mounting facility arrangement provided.
4 POINT-Rectangular
A numeric designation which identifies the nominal diameter of the entrance/s/ provided on the item.
0.500 and 0.500/0.750
Indicates the type of system in which the item is designed to be used.
three wire single phase
The means of attaching the item.
unthreaded hole
The maximum alternating current voltage rating of the main line,expressed in volts.
240.0
Indicates the type of ground connection for which the item is designed.
solid
Indicates the type and number of circuit breakers provided.
2 single pole
The maximum electrical current which the circuit breaker will carry without interrupting the circuit,expressed in amperes.
20.0
Those features,not otherwise specified,which may be required for proper functioning of the item.
cover
Indicates the type and number of entrances provided.
1 single knockout and 2 single knockout and 3 double concentric knockout
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
additional entrance diameter numeric designator: 0.281
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel
The metallic,nonmetallic,and/or chemical properties with which the item is plated,dipped,and/or coated.the treatment is designed to protect the surface(s) and cannot be wiped off.
paint
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
rectangular, flush mounting
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81348-w+115 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Answers.
1EA
Rectangular, flush mounting
Steel
3.813 inches
Schedule B number: 8538907020
nmfc 061300
Automatic circuit breaker parts for headings 8535, 8536 or 8537
FSC 5925 ⁓ Circuit breakers
Excluding relays.
NSN 5925-00-103-6469 CIRCUIT BREAKER BOX
rectangular, flush mounting paint surface treated additional entrance diameter numeric designator: 0.281 3.813" overall width
- NIIN
- 001036469
- NIIN Date
- 06/19/68
- Schedule B
- 8538907020
- Name Code
- 19365
- FIIG
- A17600
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $62.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | Q02SANDQ0120 | Cage 56365 |
| 2. | Q02L40SWITH2EACHQ0120 | Cage 56365 |
| 3. | Q02SWITH2EACHQ0120 | Cage 56365 |
Major End Users Countries and entities
- - Department of The Navy
Availability for Q02L40F WITH 2 EACH Q0120 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 061300 CIRCUIT BREAKER/SWITCH NOI
- UFC (universal freight code)
- 34410
Similar by Design Other circuit breaker boxs with similar characteristics
Nothing similar to this part number was found in our inventory
Q02L40F WITH 2 EACH Q0120 / Circuit breaker boxWhat is the formal definition of this item?
An enclosure which includes, mounts, and protects one or more circuit breakers. it is designed for and may include a cover and such accessories as mounting hardware, brackets, and conduit fittings. may include terminal boards and/or bus conductors used as a convenience for terminating the circuit breakers. may include handle tie bars. it is usually used as a load center for the protection of certain electrical devices such as water heaters, motors, etc., or as a service center for homes or offices. for boxes which include only switches, jacks, fuseholders, terminals and/or terminal boards or fuseholders, or any combination of these devices, see switch box; jack box; terminal box; and distribution box. for boxes designed to mount and protect but do not include circuit breakers, see circuit breaker box subassembly. see also interconnecting cabinet; panel, power distribution; junction box; and cabinet, electrical equipment.
