Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. RQ160AB12BB102 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
1.3125in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.0620in.
1.313in.
0.0730in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.468 centimeters
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.2494in. and 0.2500in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.500in.
A measurement of the longest dimension of the body,in distinction from width.
2.500in.
1.4370in.
0.0930 in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of shaft bearing/s/ furnished.
bearing
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
3600.0
The maximum amount of turning force required to initiate the actuator movement.
1.50 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
1.00 INCH-Ounces
The maximum amount of turning force that can be applied through the operating shaft with0ut damage to the stops.
128.00 INCH-Ounces
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.
0.005in.
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.
0.002in.
The perpendicularity of the mounting surface,with respect to the rotational axis of the shaft,and measured on the mounting surface at a specified distance from the outside edge of the mounting surface,when the shaft is held fixed and the body of the item is rotated with specified loads applied radially and axially to the body of the item.
0.002in.
The eccentricity of the pilot diameter with respect to the rotational axis of the shaft and measured on the pilot diameter when the shaft is held and the body of the item is rotated while a specified load is applied radially to the body.
0.001in.
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.
0.001in.
The maximum difference of shaft position that occurs when the shaft is moved to the same actual output ratio point from opposite directions,expressed in degree angular rotation.
1.0
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
rugged
The position of the terminal/s/ for making connection to an item.
radially positioned over less than half the circumference
The means of attaching the item.
clamp ring
A measure of the opposition to the flow of direct or alternating current per section.
1.0 percent, rated amperes c and better flooring
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
3600.0
The change in total resistance over a specified temperature range per section,expressed as a percent of the total resistance at a specified reference temperature.
-5.0/+5.0 -65 deg celsius single section and -4.0/+4.0 -15 deg celsius single section and -2.5/+2.5 0 deg celsius single section and -2.5/+2.5 50 deg celsius single section and -5.0/+5.0 75 deg celsius single section and -5.0/+5.0 105 deg celsius single section and -5.0/+5.0 125 deg celsius single section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.50/+0.50 single section
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
125.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
3.5 7th secondary quality
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
single section independent linearity
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 single section
The feature that controls the actuator travel.
stops
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
7 oclock all primaries
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
70.0 single section
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
81349-MIL-R-39023 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
3 turret
The document designator of the specification or standard which established the item of supply.
81349-MIL-R-39023/7 government specification
Answers.
Schedule B number: 8533400080
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-127-6615 RESISTOR,VARIABLE,NONWIRE WOUND,
- NIIN
- 011276615
- NIIN Date
- 03/05/82
- Schedule B
- 8533400080
- Name Code
- 37407
- FIIG
- A002A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | MIL-R-39023/7 | Cage 81349 |
Major End Users Countries and entities
- - Republic of Korea
- - Italy
Availability for RQ160AB12BB102 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
RQ160AB12BB102 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rehostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.
