Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. RK251U specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
rectangular bushing mounted
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.562in. ⁓1-9/16"
A measurement of the longest dimension of a terminal,in distinction from width.
0.171in. and 0.191in.
The distance measured in a straight line from the bottom to the top of an item.
0.578in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.344in.
0.250in.
A measurement of the longest dimension of the body,in distinction from width.
1.312in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
0.281in.
A measurement from the bottom to the top of the body,in distinction from depth.
0.334in.
Indicates the type of facility or arrangement provided for moving the variable contact(s).
flush drive with SLOT-Hole
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
9000.0
The maximum amount of turning force required to initiate the actuator movement.
8.00 INCH-Ounces
The length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.
0.216in.
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef
The number of screw threads on the item per linear inch measured on a line parallel to the thread axis,including incomplete threads.
32.0
The position of the terminal/s/ for making connection to an item.
lower adjacent side single row
The means of attaching the item.
standard bushing
A measure of the opposition to the flow of direct or alternating current per section.
250.000 ohms single section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
125.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
0.25 free air single section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 single section
The feature that controls the actuator travel.
continuous motion
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
70.0 single section
The rate of change and distribution of resistance per section,in relation to the rotation of the control shaft,which establishes a standard taper curve designated by an alphabetic character and accepted for common usage.
a single section
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
01121-202A standard (includes industry or association standards, individual manufactureer standards, etc.) .
Indicates the type and number of terminals for providing electrical connection.
3 tab, solder lug
Answers.
1EA
0.344 inches maximum
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-071-9980 RESISTOR,VARIABLE,NONWIRE WOUND,
0.344" overall width 1.562" overall length
- NIIN
- 000719980
- NIIN Date
- 07/25/67
- Schedule B
- 8533400080
- Name Code
- 37405
- FIIG
- A002A0
- QUP
- 1
- Historical Price
- $15.80 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Canada
Availability for RK251U A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- 77.5
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Electrical appliances, small
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
RK251U / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
