Serving our customers with quality and safety first.
1
rectangular w/mounting holes/slots
not established
6.000in.
0.235in. and 0.300in.
0.235in. and 0.300in.
0.088in. and 0.098in.
0.100in. and 0.140in.
0.036in. and 0.077in.
1.218in. and 1.282in.
0.235in. and 0.300in.
0.275in.
round, slotted
single shaft
6120.0 and 9720.0
8.00 INCH-Ounces
0.490in. and 0.510in.
0.109in. and 0.160in.
2
rear end
unthreaded hole
0.100in.
1.000 megohms single section
6120.0 and 9720.0
0.290in. and 0.310in.
125.0 single section
-600.0/+600.0 single section
0.25 free air single section
-10.0/+10.0 single section
clutch
70.0 single section
a single section
3 wire lead
0.235 inches minimum and 0.300 inches maximum
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
0.235" overall width
1. | MILR22097-1 | Cage 81349 |
2. | 3011L10-105 | Cage 80294 |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.