Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. P16NP102MAB15 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
A measurement of the extent of threads,including incomplete threads,along a line parallel to the longitudinal axis.
7.0 mm
A measurement of the longest dimension of a terminal,in distinction from width.
6.0 mm
9.5 mm and 10.5 mm
The length of a straight line which passes through the center of the body,and terminates at the circumference.
10.0 mm
The length of a straight line which passes through the center of a mounting hole,and terminates at the circumference.
10.0 mm
A measurement taken at right angles to the length of the mounting slot,in distinction from thickness.
8.1 mm and 8.2 mm
6.5 mm and 7.5 mm
A measurement of the longest dimension of the body,in distinction from width.
14.5 mm and 16.5 mm
A measurement of the longest straight line across a circular cross-sectional plane.
16.0 mm
Indicates the type of switch included in the item.
rotary
Indicates the type of facility or arrangement provided for moving the variable contact(s).
integral knob
The maximum amount of force requred to maintain actuator movement.
2.0 CENTIMETER-Grams
The maximum amount of turning force that can be applied through the operating shaft with0ut damage to the stops.
25.0 CENTIMETER-Grams
The number of mounting facilities provided.
1
The position of the terminal/s/ for making connection to an item.
rear end
The means of attaching the item.
unthreaded hole
Those features,not otherwise specified,which may be required for proper functioning of the item.
panel seal
A measure of the opposition to the flow of direct or alternating current per section.
10.0 megohms single section
The location per section,in degrees,of effective electrical rotation between the counterclockwise terminal of a resistor and each tap terminal.
270.0 single section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
300.0
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.
-150.0 to 150.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
1.0 heat sink single section
The limits of permissible variation from the rated value of the location of a tap per section.
-10.0 to 10.0 deg angular rotation single section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-20.0 to 20.0 single section
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
40.0 single section
The rate of change and distribution of resistance per section,in relation to the rotation of the control shaft,which establishes a standard taper curve designated by an alphabetic character and accepted for common usage.
a single section
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
knob potentiometer
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
unit weight 4.5g typical, mounting nut torque is 250ncm,
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
CECC41000 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) . or IEC60393-1 specification (includes engineering type bulletins, brochures, etc., that reflect specification type data in specification format; excludes commercial catalogs, industry directories, and similar trade publications, reflecting general type data on certain environmental and performance requirements and test conditions that are shown as "typical", "average", "", etc.) .
Indicates the type and number of terminals for providing electrical connection.
3 tab, solder lug
Answers.
7.0 millimeters
Schedule B number: 8533400080
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-613-4295 RESISTOR,VARIABLE,NONWIRE WOUND,
unit weight 4.5g typical, mounting nut torque is 250ncm, knob potentiometer 7.0mm thread length
- NIIN
- 016134295
- NIIN Date
- 11/07/12
- Schedule B
- 8533400080
- Name Code
- 37405
- FIIG
- A002A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - France
- - Germany
Availability for P16NP102MAB15 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
P16NP102MAB15 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
