Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. P11A2VCAPFY00T1405 specification
The number of individual elements.
2
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
rectangular
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
11.5 mm
5.3 mm
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
6.0 mm
A measurement of the longest dimension of the shaft,in distinction from width.
15.5 mm
A measurement of the longest dimension of the body,in distinction from width.
13.1 mm
A measurement taken at right angles to the length of the body,in distinction from thickness.
12.5 mm
A measurement from the bottom to the top of the body,in distinction from depth.
16.0 mm
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round, flatted
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
The length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.
10.0 mm
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
iso m
The position of the terminal/s/ for making connection to an item.
rear end
The means of attaching the item.
standard bushing
A measure of the opposition to the flow of direct or alternating current per section.
2.2 kilohms all sections
The maximum amount of electrical energy that can be expended per section,expressed in watts.
1.0 free air all sections
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 all sections
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
electrical travel: 27 deg p/m 10 deg; mechanical travel: 300 deg p/m 5 deg; rated voltage: 36.9 v; end stop torque: 80cmn max; hardware: nut: MA0 x 0.75 depth 2mm, wrench: 12mm, internal tooth washer
Indicates the type and number of terminals for providing electrical connection.
6 tab, solder lug
Answers.
Schedule B number: 8533400080
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-586-2800 RESISTOR,VARIABLE,NONWIRE WOUND,
electrical travel: 27 deg p/m 10 deg; mechanical travel: 300 deg p/m 5 deg; rated voltage: 36.9 v; end stop torque: 80cmn max; hardware: nut: MA0 x 0.75 depth 2mm, wrench: 12mm, internal tooth washer
- NIIN
- 015862800
- NIIN Date
- 06/22/10
- Schedule B
- 8533400080
- Name Code
- 37407
- FIIG
- A002A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- Has ESD sensitivity
Major End Users Countries and entities
- - Australia
Availability for P11A2VCAPFY00T1405 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
P11A2VCAPFY00T1405 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rehostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.
