Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6574-51-202 specification
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.0930in.
2.000in.
0.0800in.
0.6
A measurement of the amount of turning necessary to bring one half into coincidence with another,expressed in degrees.
0.6
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.249in.
1.1870in.
0.0620in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of shaft bearing/s/ furnished.
ball
The maximum amount of turning force required to initiate the actuator movement.
0.001 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
0.001 INCH-Ounces
The total axial excursion of the shaft measured at the end of the shaft with a specified axial load applied alternately in the opposite directions.
0.003in.
The eccentricity of the shaft diameter with respect to the rotational axis of the shaft,measured at a specified distance from the end of the shaft,when the body of the item is held fixed and the shaft is rotated with a specified load applied radially to the shaft.
0.025in.
The perpendicularity of the mounting surface,with respect to the rotational axis of the shaft,and measured on the mounting surface at a specified distance from the outside edge of the mounting surface,when the shaft is held fixed and the body of the item is rotated with specified loads applied radially and axially to the body of the item.
0.003in.
The eccentricity of the pilot diameter with respect to the rotational axis of the shaft and measured on the pilot diameter when the shaft is held and the body of the item is rotated while a specified load is applied radially to the body.
0.025in.
The total radial excursion of the shaft measured at a specified distance from the front surface of the unit with a specified radial load applied alternately in opposite directions at a specified point.
0.003in.
The maximum difference of shaft position that occurs when the shaft is moved to the same actual output ratio point from opposite directions,expressed in degree angular rotation.
0.1
The means of attaching the item.
clamp ring
The name assigned to the item by the government agency or commercial organization controlling the design of the item.
precision potentiometer
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
includes a tap at 50% voltage output
Answers.
Schedule B number: 8533400080
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-567-6831 RESISTOR,VARIABLE,NONWIRE WOUND,
includes a tap at 50% voltage output precision potentiometer
- NIIN
- 015676831
- NIIN Date
- 10/02/08
- Schedule B
- 8533400080
- Name Code
- 37407
- FIIG
- A002A0
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Brazil
Availability for 6574-51-202 A member of our team will provide you with a price and availability quote
Request a Quote »Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
6574-51-202 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rehostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.
