Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 504207038 specification
The number of individual elements.
1
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
0.400in. ⁓13/32"
The distance measured in a straight line from the bottom to the top of an item.
0.480in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
0.400in.
Indicates the type of facility or arrangement provided for moving the variable contact(s).
flush drive with SLOT-Hole
The national stock number or the identification information of the end equipment for which the item is a part.
6625-01-230-7325 recorder, tape
The position of the terminal/s/ for making connection to an item.
rear end
The means of attaching the item.
terminal
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
0.077 cubicin.
A measure of the opposition to the flow of direct or alternating current per section.
50.0 kilohms single section
Indicates the type and number of terminals for providing electrical connection.
3 tab, solder lug
Answers.
1EA
0.400 inches
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-312-6645 RESISTOR,VARIABLE,NONWIRE WOUND,
Used on 6625-01-230-7325 recorder,tape. 0.400" overall width 0.400" overall length
- NIIN
- 013126645
- NIIN Date
- 12/21/89
- Schedule B
- 8533400080
- Name Code
- 37405
- FIIG
- A002A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $26.55 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 773101758 | Cage 62614 |
| 2. | TM10KPV-50K | Cage S4821 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 504207038 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
504207038 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
