Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 412197-12 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical servo mounted
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The length of a straight line which passes through the center of that portion used to guide the item and terminates at the circumference.
1.56200in.
The length of the pilot,which is the unthreaded portion beyond the thread used to guide the item.
0.06200in.
The dimension measured along the longitudinal axis with terminated points at the extreme ends of the item.
1.727in. ⁓1-47/64"
1.750in.
0.07800in.
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.767in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.125in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.750in.
A measurement of the longest dimension of the body,in distinction from width.
0.977in.
A measurement of the longest straight line across a circular cross-sectional plane.
2.120in. ⁓2-1/8"
1.76700in.
0.09300in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
165.0 and 175.0
The position of the terminal/s/ for making connection to an item.
upper adjacent side two rows
The means of attaching the item.
clamp ring
Those features,not otherwise specified,which may be required for proper functioning of the item.
nonmetallic shaft
A measure of the opposition to the flow of direct or alternating current per section.
8.5 kilohms single section
The location per section,in degrees,of effective electrical rotation between the counterclockwise terminal of a resistor and each tap terminal.
180.0 single section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
360.0
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
85.0 single section
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.
-300.0/+300.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
4.0 free air single section
The number of fixed terminals at points between the end terminals that provide connection to the intermediate values of the total value per section.
1 single section
The limits of permissible variation from the rated value of the location of a tap per section.
-5.0/+5.0 ohms single section
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-5.0/+5.0 single section
The feature that controls the actuator travel.
continuous motion
Indicates the location of a tap relative to the counterclockwise terminal per section,expressed in ohms.
4250.0 single section
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
20.0 single section
The rate of change and distribution of resistance per section,in relation to the rotation of the control shaft,which establishes a standard taper curve designated by an alphabetic character and accepted for common usage.
a single section
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
80020-41297 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Indicates the type and number of terminals for providing electrical connection.
4 tab, solder lug
Answers.
1EA
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-00-134-0424 RESISTOR,VARIABLE,NONWIRE WOUND,
1.727" overall length
- NIIN
- 001340424
- NIIN Date
- 08/25/69
- Schedule B
- 8533400080
- Name Code
- 37405
- FIIG
- A002A0
- Item Weight
- 0.200lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $822.75 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 134FTS107-2 | Cage 08815 |
| 2. | 22027-2 | Cage 04454 |
| 3. | 22027-2 | Cage 10112 |
Major End Users Countries and entities
- - Department of The Navy
Availability for 412197-12 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Instruments, electric meter
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
412197-12 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
