Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 24B508072G01 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
cylindrical bushing mounted
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
The length of a straight line which passes through the center of the body,and terminates at the circumference.
1.156in.
The length of a straight line which passes through the center of a shaft,and terminates at the circumference.
0.250in.
A measurement of the longest dimension of the shaft,in distinction from width.
0.875in.
0.375in.
A measurement of the longest dimension of the body,in distinction from width.
0.625in.
The style designation indicating the configuration that most nearly corresponds to the appearance of the shaft.
round, slotted
Indicates the type of facility or arrangement provided for moving the variable contact(s).
single shaft
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
292.0
The maximum amount of turning force required to initiate the actuator movement.
6.00 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
6.00 INCH-Ounces
The maximum amount of turning force that can be applied through the operating shaft with0ut damage to the stops.
192.00 INCH-Ounces
Indicates the location of a mechanical device which prevents the turning of the item on its mounted surface,expressed by the twelve hour clock designation.
at 9 oclock
The linear measurement of the distance from the actuator centerline to the centerline of the nonturn device.
0.531in.
The measure of sensitivity of the item to be packaged. a factor used by packaging engineers in devising proper cushioning in a package.
moderately rugged
The national stock number or the identification information of the end equipment for which the item is a part.
1520-01-082-0686 helicopter, electron
The length of a straight line which passes through the center of a coaxial cylinder which would bound the crest of an external thread or the root of an internal thread.
0.375in.
A designation distinguishing one group of screw thread diameter-pitch combinations from another by the number of threads per measurement scale for a specific diameter.
unef
The number of screw threads on the item per linear inch measured on a line parallel to the thread axis,including incomplete threads.
32.0
The position of the terminal/s/ for making connection to an item.
radially positioned over less than half the circumference
The means of attaching the item.
standard bushing
Those features,not otherwise specified,which may be required for proper functioning of the item.
hermetically sealed and humidity proof and panel seal
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
0.656 cubicin.
A measure of the opposition to the flow of direct or alternating current per section.
4.5 kilohms single section
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
312.0
The change in total resistance over a specified temperature range per section,expressed as a percent of the total resistance at a specified reference temperature.
+0.0/+5.5 -55 deg celsius single section and +0.0/+3.0 -25 deg celsius single section and +0.0/+1.5 0 deg celsius single section and -2.0/+2.0 85 deg celsius single section and +0.0/+4.5 120 deg celsius single section
The permissible range per section by which the actual value of resistance or voltage at any specified point may deviate from the theoretical value for the linear or nonlinear function,expressed as a minus and plus percent.
-0.50/+0.50 single section
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
120.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
2.25 free air single section
The fidelity of the relationship between the actual function characteristics and the theoretical function per section.
single section independent linearity
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 single section
The feature that controls the actuator travel.
stops
The specified mathematical relation per section between the terminal resistance,or output ratio,and the rotation of the actuator.
single section linear
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
70.0 single section
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
two or three resistors in paralell to calibrate variable resistor
Indicates the type and number of terminals for providing electrical connection.
3 tab, solder lug and 2 wire lead
Answers.
1EA
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-335-7980 RESISTOR,VARIABLE,NONWIRE WOUND,
Used on 1520-01-082-0686 helicopter,electron. two or three resistors in paralell to calibrate variable resistor
- NIIN
- 013357980
- NIIN Date
- 03/14/91
- Schedule B
- 8533400080
- Name Code
- 37407
- FIIG
- A002A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $28,066.05 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Army
Availability for 24B508072G01 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
24B508072G01 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rehostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.
