Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 228113-3 specification
The number of individual elements.
1
The style designation indicating the configuration that most nearly corresponds to the appearance of the body.
rectangular w/pointer adjustment
An indication that the level of probability that an item will operate without failure,at a specified rated capability,at a specified temperature,and for a specified period of time,has been established by testing random samples of production lot.
not established
A measurement of the longest dimension of a terminal,in distinction from width.
0.200in.
A measurement of the longest dimension of the body,in distinction from width.
0.240in.
A measurement taken at right angles to the length of the body,in distinction from thickness.
0.250in.
A measurement from the bottom to the top of the body,in distinction from depth.
0.320in.
Indicates the type of facility or arrangement provided for moving the variable contact(s).
flush drive with SLOT-Hole
That part of the total rotational travel of the actuator that produces a change in output,expressed in degree angular rotation.
240.0
The maximum amount of turning force required to initiate the actuator movement.
3.00 INCH-Ounces
The maximum amount of force requred to maintain actuator movement.
3.00 INCH-Ounces
The maximum amount of turning force that can be applied through the operating shaft with0ut damage to the stops.
4.00 INCH-Ounces
The center to center distance between terminals.
0.200in.
The position of the terminal/s/ for making connection to an item.
lower adjacent side two rows
The means of attaching the item.
terminal
The center to center distance between the rows of terminals.
0.100in.
A measurement of volume taken by multiplying the length by the width by the height of an item and rendered in cubic units.
0.0192 cubicin.
A measure of the opposition to the flow of direct or alternating current per section.
1.000 percent, rated amperes c and better flooring
The measurement of the rotary mechanical motion of the actuating shaft of an item,expressed in degrees.
270.0
The center to center distance between the center terminal and the outside terminal.
0.100 in.
The ambient temperature at which the power dissipation of each section is derated to zero percent of the full rated power.
150.0 single section
A constant that represents the proportionate change in resistance caused by a change in temperature per section,expressed in parts per million per degree celsius.
-100.0/+100.0 single section
The maximum amount of electrical energy that can be expended per section,expressed in watts.
0.25 7th secondary quality
The limits of permissible variation in the electrical resistance value per section of an item from its rated value,expressed in percent.
-10.0/+10.0 single section
The feature that controls the actuator travel.
stops
The ambient temperature,expressed in degrees celsius,of the medium surrounding each section at which it can be operated continuously at full rated power.
85.0 single section
The rate of change and distribution of resistance per section,in relation to the rotation of the control shaft,which establishes a standard taper curve designated by an alphabetic character and accepted for common usage.
a single section
The specification,standard,drawing,or similar instrument that specifies environmental and performance requirements or test conditions under which an item is tested and establishes acceptable limits within which the item must conform identified by an alphabetic and/or numeric reference number. includes the commercial and government entity (cage) code of the entity controlling the instrument.
37695-228113 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
Indicates the type and number of terminals for providing electrical connection.
3 pin
Answers.
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
NSN 5905-01-183-6290 RESISTOR,VARIABLE,NONWIRE WOUND,
- NIIN
- 011836290
- NIIN Date
- 07/07/84
- Schedule B
- 8533400080
- Name Code
- 37405
- FIIG
- A002A0
- Item Weight
- 0.100lbs
- Item Dimensions
- --
- QUP
- Historical Price
- $80.43 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- Has ESD sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 3329W-1-102 | Cage 32997 |
| 2. | 8050EKX102GM | Cage 30983 |
| 3. | 182-00-1K1289 | Cage 84048 |
Major End Users Countries and entities
- - Department of The Navy
- - Department of The Air Force
- - Belgium
- - Republic of Korea
- - Greece
- - Turkey
Availability for 228113-3 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 77.5
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- Electrostatic sensitive device (esd)
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Instruments/equipment/supplies for radio, communications, electrical, laboratory, etc. (includes signal corps)
- Commodity (for shipments via water)
- Communications/electronics, other than sigint/ew or comsec repair parts and components
- NMFC (national motor freight code)
- 062960 REOSTATS/PARTS NOI
- UFC (universal freight code)
- 35140
Similar by Design Other resistors with similar characteristics
Nothing similar to this part number was found in our inventory
228113-3 / Resistor,variable,nonwire wound,What is the formal definition of this item?
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the functional tolerance (linearity), if given, of the output is greater than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually positioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rheostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable, nonwire wound precision; and resistor (1), variable, wire wound, precision.
