Serving our customers with quality and safety first.
7
cylindrical servo mounted
not established
2.8750in.
0.0550in.
5.780in. ⁓5-25/32"
2.875in.
0.0600in.
3.125in.
0.250in.
0.750in.
5.000in.
3.364in. ⁓3-3/8"
3.0050in.
0.0980in.
round
single shaft
350.0
7.00 INCH-Ounces
0.001in.
0.003in.
0.001in.
radially positioned over less than half the circumference
clamp ring
humidity proof
10.0 percent, rated amperes c and better finish
20.0 percent, rated amperes c finish
5.0 percent, rated amperes c and better select
5.0 percent, rated amperes c drop siding
50.0 percent, rated amperes c and better v.g. stepping
570.0 ohms c and better industrial clears
7.0 percent, rated amperes c flooring
360.0
-0.02/+0.02 all sections
150.0 all sections
-400.0/+400.0 all sections
4.0 free air all sections
all sections absolute conformity
1 4th section
2 5th section
3 3rd section
+0.0/+20.0 3rd section
+0.0/+20.0 5th section
+0.0/+20.0 7th section
-0.5/+0.5 6th section
-10.0/+10.0 1st section
-10.0/+10.0 4th section
-20.0/+20.0 2nd section
continuous motion
all sections table
25.0 all sections
19200-10545461 drawing (this is the basic governing drawing, such as a contractor drawing, original equipment manufacturer drawing, etc.; excludes any specification, standard or other document that may be referenced in a basic governing drawing)
27 turret
Schedule B number: 8533400080
nmfc 062960
Variable resistors, including potentiometers
FSC 5905 ⁓ Resistors
Excluding resistance wire.
5.780" overall length
1. | 21054-2A | Cage 10112 |
2. | 743-6181 | Cage 04454 |
3. | 9078 | Cage 04454 |
4. | 5905008325237 | Cage A00AM |
Nothing similar to this part number was found in our inventory
A resistor in which a sliding or rolling contact moves over an exposed area of the resistive element to change the ohmic value of the output. the finctional tolerance (linearity) of the output is equal to or less than plus or minus 1 percent on linear outputs. specified outputs such as sine, cosine, tangent, etc., shall be considered to be precision. for items having manually postioned taps designed to be set and fixed prior to use, see resistor, adjustable. for items with step by step variation, see rehostat and resistor, step by step. for tandem-mounted items designed to function together as an attenuator (and rated accordingly), see attenuator, variable. excludes resistor (1), variable, wire wound, nonprecision; resistor (1), variable nonwire wound, nonprecision; and resistor (1), variable, wire wound, precision.