Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 5990602-2 specification
The length of a straight line which passes through the center of a circular figure or body,and terminates at the inside circumference.
23.850in.
An overall measurement taken at right angles to the length of an item,in distinction from thickness.
1.250in.
Indicates the type of fastening device provided.
T-Bolt
The application and/or function for which the item is designed.
used on fairing mk 19 f/mine mine mk 52 shipped 1-4 per cardboard box, box may not exceed 40 lbs per pkg.
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
the T-Bolt assembly must be capable of withstanding without distortion, a torque of 18 LBF-Ft min applied to locking nut, when tightened on a mandrel conforming to 23.850 in diameter
The chemical compound or mechanical mixture properties of which the item is fabricated.
steel corrosion resisting
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
band
Answers.
Band
Steel corrosion resisting
T-bolt
1.250 inches
23.850 inches
FSC 4730 ⁓ Hose, pipe, tube, lubrication, and railing fittings
Excluding air conditioning-heating fittings (fsc 4520); bituminized fiber and concrete fittings (fsc 5630); conduit boxes and fittings (fsc 5975); downspout fittings (fsc 5670); medical and surgical fittings (fsc 6515); laboratory fittings (fsc 6640); post caps and rail ends (fsc 5660); machine thread bushings and plugs (fsc 5365).
NSN 4730-01-325-2489 CLAMP,HOSE
band the t-bolt assembly must be capable of withstanding without distortion, a torque of 18 lbf-ft min applied to locking nut, when tightened on a mandrel conforming to 23.850 in diameter t-bolt 1.250" overall width 23.850" inside diameter
- NIIN
- 013252489
- NIIN Date
- 08/31/90
- Schedule B
- Name Code
- 13566
- FIIG
- A12700
- QUP
- Historical Price
- $50.00 EA
- DEMIL / ITAR
- USML/ITAR controlled item (Code: B)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy DSOR Depot source of repair has not been assigned. this is a temporary code that will be used only until a dsor is assigned as speci
Availability for 5990602-2 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Metal hardware
- NMFC (national motor freight code)
- 095190 HARDWARE, NOI
- UFC (universal freight code)
- 49790
Similar by Design Other clamps with similar characteristics
Nothing similar to this part number was found in our inventory
5990602-2 / Clamp,hoseWhat is the formal definition of this item?
A clamp in which the body (band or wire) completely encircles an item and distributes a relatively even amount of pressure throughout the entire 360 degrees (6.282 radians) of the periphery of the item to be compressed. its compression quality is dependent upon an integral screw mechanism, (screw, bolt spring compression and the like mechanical fasteners), or it may be applied by a device not integral with the clamp itself. it is specifically designed to prevent leakage between a hose and its attaching connection(s) when the body of the clamp is round or circular. for square, rectangular, or irregularly shaped items, see clamp, hose, special-shaped. excludes clamp, electrical; clamp, loop; clamp, fire hose, shutoff; ferrule (as modified); and hand screw.
