Serving our customers with quality and safety first.
rectangular
0.9950in. and 1.0050in.
round
0.5085in. and 0.5115in.
0.0600in. and 0.0650in.
lubricant, manufacturers standard
square all corners
copper alloy
round
1EA
Round
Copper alloy
0.9950 inches minimum and 1.0050 inches maximum
Schedule B number: 8482105008
nmfc 114870
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
round 0.9950" outside diameter
1. | EW081601 | Cage 4T3X6 |
2. | TT1001 | Cage 70901 |
3. | TB816 | Cage 71041 |
4. | 8436863-6 | Cage 19204 |
5. | 13H2100 | Cage 26921 |
6. | 309-0727-00 | Cage 13499 |
7. | 100923 | Cage 10237 |
8. | CSW515-0062 | Cage 71129 |
9. | TW51 | Cage 71366 |
10. | SLT529-2 | Cage 02254 |
11. | 88-3131-01 | Cage 93230 |
12. | MILB5687TY1C0MPA | Cage 81349 |
13. | TW51 | Cage 60960 |
14. | 43113 | Cage 31435 |
15. | TWS1 | Cage 60960 |
16. | EW081601 | Cage 60960 |
17. | 92007A1100 | Cage 01365 |
18. | 108392 | Cage 14320 |
19. | 43113 | Cage 35351 |
20. | 503881 | Cage 73030 |
21. | TWS1 | Cage 71366 |
22. | PS1-1432-6 | Cage 98897 |
23. | 92007A1100-1 | Cage 01365 |
24. | DMS0106-1 | Cage 00539 |
25. | 3120-661-6191 | Cage SCY13 |
26. | 3120006616191 | Cage SCY13 |
27. | PS1-1432-6 | Cage 06887 |
28. | TB816 | Cage 08018 |
29. | 1561883 | Cage 10001 |
30. | TT1001 | Cage 12204 |
31. | T1001 | Cage 12204 |
32. | T1001 | Cage 70417 |
33. | TT1001 | Cage 70417 |
34. | T10001 | Cage 70901 |
35. | TT1001 | Cage 75292 |
Nothing similar to this part number was found in our inventory
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.