Serving our customers with quality and safety first.
rectangular
37.00 mm and 37.60 mm
round
1.0040in. and 1.0120in.
3.12 mm and 3.20 mm
chamfered first inside corner
chamfered second inside corner
square first outside corner
square second outside corner
first inside corner chamfer length 0.70 mm min, 1.30 mm max, first inside corner chamfer angle 45.0 deg
steel comp 1010
66 fed std single material response
round
1EA
Round
Steel comp 1010
37.00 millimeters minimum and 37.60 millimeters maximum
Schedule B number: 8482105008
nmfc 114850
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
round first inside corner chamfer length 0.70mm min, 1.30mm max, first inside corner chamfer angle 45.0 deg 37.00mm outside diameter
1. | 8329 | Cage 96151 |
2. | 777-017 | Cage U3788 |
Nothing similar to this part number was found in our inventory
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.