Serving our customers with quality and safety first.
rectangular
2.1150in. and 2.1350in.
round
1.3770in. and 1.3800in.
0.1225in. and 0.1275in.
square all corners
adum and abmz
125.0 microinches inside diameter surface of body
125.0 microinches largest outside diameter
63.0 microinches left side
63.0 microinches right side
groove flat bearing surface
copper alloy 510
round
Round
Copper alloy 510
2.1150 inches minimum and 2.1350 inches maximum
Schedule B number: 8482105008
nmfc 114870
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
round 2.1150" outside diameter
Nothing similar to this part number was found in our inventory
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.