Serving our customers with quality and safety first.
rectangular
2.9950in. and 3.0050in.
round
2.0310in. and 2.0360in.
0.1520in. and 0.1530in.
square all corners
13 splines equally spaced inside dia
steel comp 1045 or steel comp 1050 or steel comp 1055 or steel comp 1065 or steel comp 1075 or steel comp 1085 or steel comp 1095
QQ-S-777 fed spec single material response
ground
phosphate manganese
MIL-P-16232, type m, class 2 mil spec single treatment response
round
1EA
Round
Steel comp 1045 or steel comp 1050 or steel comp 1055 or steel comp 1065 or steel comp 1075 or steel comp 1085 or steel comp 1095
2.9950 inches minimum and 3.0050 inches maximum
Schedule B number: 8482105008
nmfc 114850
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
round phosphate manganese surface treated 13 splines equally spaced inside dia 2.9950" outside diameter
1. | G744-734-6746 | Cage 19207 |
2. | 1001W | Cage 95019 |
3. | 0316688 | Cage H0001 |
4. | 1001W | Cage 02413 |
5. | 4730009902131 | Cage A00AM |
6. | 5310000905968 | Cage A00AM |
Nothing similar to this part number was found in our inventory
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.