Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 6097B35 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
rectangular
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
1.3650in. and 1.3850in.
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
round
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.
0.8800in. and 0.8900in.
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.0600in. and 0.0640in.
The number of holes in the bearing surface excluding the center hole.
1 first
The length of a straight line which passes through the center of a bearing surface hole,and terminates at the circumference.
0.0615in. first and 0.0620in. first
The physical configuration of the corner.
square all corners
The feature inherent in the item design to effect lubrication.
groove flat bearing surface
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
three grooves on each side, circular groove on one side 0.0312 in. deep, 0.2500 in. wide 4.1875 in. dia
The chemical compound or mechanical mixture properties of which the item is fabricated.
copper alloy 938
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
round
Answers.
1EA
Round
Copper alloy 938
1.3650 inches minimum and 1.3850 inches maximum
Schedule B number: 8482105008
nmfc 194120
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-00-661-9583 BEARING,WASHER,THRUST
round three grooves on each side, circular groove on one side 0.0312 in. deep, 0.2500 in. wide 4.1875 in. dia 1.3650" outside diameter
- NIIN
- 006619583
- NIIN Date
- 01/01/63
- Schedule B
- 8482105008
- Name Code
- 13211
- FIIG
- A045A0
- QUP
- 1
- Historical Price
- $5.33 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- Metal content unknown
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Major End Users Countries and entities
- - Department of The Navy
- - Spain
- - Greece
Availability for 6097B35 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- Rating variable
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 194120 WASHERS/GASKETS/PCKG DVCS NOI
- UFC (universal freight code)
- 95100
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
6097B35 / Bearing,washer,thrustWhat is the formal definition of this item?
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.
