Price Quote Get an up to date pricing and availability quote for this product. Order online or over the phone.
Quality Commitment
Serving our customers with quality and safety first.
- AS9120 Certified
- Audited supply chain
- ITAR Registered
- DDTC Registered
- HAZMAT Certified
- Customer service objectives
- Every product 100% inspected
Datasheet. 300167-120 specification
The style designation indicating the configuration that most nearly corresponds to the cross-sectional shape of the item.
rectangular
The shortest straight line between flats,perpendicular to the height of the wrenching surface.
20.7500in.
The length of a straight line which passes through the center of a circular figure or body,and terminates at the outside circumference.
23.7500in.
The style designation indicating the configuration that most nearly corresponds to the shape of the center hole.
round
The length of a straight line which passes through the center of a circular figure or body,and terminates at the circumference.
13.5625in.
An overall measurement of the smallest dimension of an item,in distinction from length or width.
0.5000in.
The element,compound,or mixture with which the item is lubricated.
grease
The physical configuration of the corner.
chamfered first inside corner
The physical configuration of the corner.
square first outside corner
The physical configuration of the corner.
square second inside corner
The physical configuration of the corner.
square second outside corner
The feature inherent in the item design to effect lubrication.
groove left side and perforation left side
Those unusual or unique characteristics or qualities of an item not covered in the other requirements and which are determined to be essential for identification.
segmented along vert cl; top half flat 11.125 in. from horiz cl, bottom half flat 9.625 in. from horiz cl; third peripheralflat 12.000 in. R-H of vert cl w/one 1.250 in. r notch centered on horiz cl; sixteen equally spaced radial grease grooves in left bearing face, 0.250 in. w by 0.125 in. dp; sixteen longitudinal grease groove around left face inside corner, 0.250 in. w by 0.125 in. dp; six 0.656 in. dia countersunk through holes in left bearing face, unequally spaced on 21.500 in. dia blt circle
The chemical compound or mechanical mixture properties of which the item is fabricated.
plastic phenolic and cotton
The specification,standard,or manufacturers reference,and the classification designation,such as class,condition,temper,and the like,that identifies the material.
MIL-P-18324 mil spec all material responses
The style designation indicating the configuration that most nearly corresponds to the appearance of the item.
round w/two flats
Answers.
1EA
Round w/two flats
Plastic phenolic and cotton
23.7500 inches
Schedule B number: 8482105008
nmfc 114850
Thrust ball bearings
FSC 3120 ⁓ Bearings, plain, unmounted
Note-bearings in this class are generally one piece that retain and position moving and/or rotating parts. they may have lubrication grooves/fittings/facilities or include pre-lubrication.
Excluding antifriction bearings (fsc 3110); mounted bearings (fsc 3130).
NSN 3120-01-244-5983 BEARING,WASHER,THRUST
round w/two flats segmented along vert cl; top half flat 11.125 in. from horiz cl, bottom half flat 9.625 in. from horiz cl; third peripheralflat 12.000 in. r-h of vert cl w/one 1.250 in. r notch centered on horiz cl; sixteen equally spaced radial grease grooves in left bearing face, 0.250 in. w by 0.125 in. dp; sixteen longitudinal grease groove around left face inside corner, 0.250 in. w by 0.125 in. dp; six 0.656 in. dia countersunk through holes in left bearing face, unequally spaced on 21.500 in. dia blt circle 23.7500" outside diameter
- NIIN
- 012445983
- NIIN Date
- 11/15/86
- Schedule B
- 8482105008
- Name Code
- 13211
- FIIG
- A045A0
- Item Weight
- 0.000lbs
- Item Dimensions
- --
- QUP
- 1
- Historical Price
- $1,820.85 EA
- DEMIL / ITAR
- Uncontrolled item (Code A)
- Hazmat
- No hazard information available from HMIRS.
- MSDS
- N/A
- Precious Metals
- No precious metals
- Enviromental
- N/A
- Electrostatic ESD & EMI
- No ESD or EMI sensitivity
Other Part Numbers Parts with same form, fit, and function by other manufacturers
| 1. | 300167-F PIECE 120 | Cage 05340 |
Major End Users Countries and entities
- - Department of The Navy
- - Brazil
Availability for 300167-120 A member of our team will provide you with a price and availability quote
Request a Quote »Shipping Information
- Special Handling
- Other or no special handling required (sh)
- LTL (less than a truck load rating)
- 70.0
- LCL (less than a car load rating)
- Unknown
- Special Cargo
- No special type of cargo code applicable
- Air Freight (Minimum cargo door size required)
- Shipment is not a consolidation and does not exceed 84 inches in any dimension.
- Customs Requirement Classification
- Trailers, vehicles, machinery, shop and warehouse equipment and supplies including special tools and equipment, ground servicing
- Commodity (for shipments via water)
- Bearings
- NMFC (national motor freight code)
- 114850 BEARING/BUSHING O/T BALL/ROLLER I/S
- UFC (universal freight code)
- 58880
Similar by Design Other bearings with similar characteristics
Nothing similar to this part number was found in our inventory
300167-120 / Bearing,washer,thrustWhat is the formal definition of this item?
An item of any peripheral shape usually having one flat or spherical surface and a centrally located hole. it is designed for applications involving moving (kinetic) loads. except for items fabricated from bearing quality synthetic (plastic) or composed of multilayer material, one bearing surface must either have a specific surface finish designation of 32 microinch (0.8 micrometre) or less, arithmetical average (aa) (arithmetic mean deviation) or one of the following conditions: be lapped or ground; have visible or detectable means of lubrication; grooves, indentations; or self-lubrication. the thickness must not exceed 25 percent of the outside diameter of the shortest distance between peripheral flats (when thickness and/or outside diameter is designated as a tolerance dimension, the maximum dimension will be used to determine compliance). excludes straight, tubular (without flange) items having a bearing surface(s) parallel to the axis of the bore only. see also washer, flat and spacer, sleeve.
